** SOLD **
Biaxially oriented polypropylene (BOPP) and Biaxially oriented polyester (BOPET) are commonly produced in tender-frame lines. In these lines material is melted through a flat extrusion die (T-die) and solidified onto a cooled roller. Material is then stretched in machine direction in an MDO. Thereafter material is stretched in transversal direction in a TDO. These processes deliver a molecule orientation in both axes, this enhances many of their properties, particularly the mechanical, impact, barrier and optical properties.
Ask more informations
about a similar one
- Machine Code
- BO91
- Manufacturer
- BRUCKNER
- Year
- 2003
- Number of layers
- 5
- Film structure
- ABCDE
- Material
- BOPP Thickness 10-70 my
- Output
- 2500 Kg/h. max 350m/min
- Width (mm)
- 6600
- Extruder 1 Description
- A - SINGLE SCREW , diam 90mm, 4 components dosing system, output 180kg/h, AC motor New spare inverter available
- Extruder 2 Description
- B - SINGLE SCREW, diam 120mm, 3 components dosing system, output 400kg/h, AC motor New spare inverter available
- Extruder 3 Description
- C - TWIN SCREW diam 2x 139mm Co-rotating, gravimetric dosing unit: 4x pre-dosign + 2 x main, output 2800 kg/h. Customer bought in 2024 new motor SIEMENS for value of over 300 KEur
- Extruder 4 Description
- D - SINGLE SCREW 120mm, 3 components dosing system, output 400kg/h, AC motor New spare inverter available
- Extruder 5 Description
- E - SINGLE SCREW 90mm, 4 components dosing system, output 180kg/h, AC motor New spare inverter available
- Head description
- Make Simplas. Automatic thickness profile adjustment via 32 thermal bolts
- Die width
- 1025mm
- Thickness controll system
- Automatic thickness control system. Gauge bet rays
- Chill roll unit
- Chill roll in water bath. Gloss surface finish.
- MDO description
- - 14 x pre-heating rollers (6 chrome plated surface, 8 teflon surface). Diam of preheating rollers 614mm - 6 x stretching rollers - 2x Annealing rollers Rollers heated by thermal oil ( thermal oil heater included) Drive/transmission: Distribution gearbox, cordon shaft and belts
- TDO description
- - Pre heating section 15m length - Stretching section 12m length - Annealing section 12m length - Heat set section 5,2m length Heating via thermal oil Chain type 4.4.4
- Corona treatment
- 2 x MERO treaters
- Pull roll unit
- Thickness gauge Themo Fischer type Beta rays, corona treatment 1 side, 3 generators, edge trim, In lince grinder make Hosokawa Alpine
- Rewinder width
- 6600mm net
- Rewinder description
- Turret type max diam 1200mm
- Slitter
- Atlas slitter, Driven unwinder, Rewinder with independent winding stations center driven, 12 x couple of arms/winding stations. driven position of winding stations. Max diam rewinder 1000mm
- Note
- Main extruder twin screw, 4 single screw extruder. Including oil heater, LPG fired Including water chiller Including 1 x compressor Sets of spare parts available PLC for Bruckner line: Siemens S7
| Machine Code | BO91 |
| Manufacturer | BRUCKNER |
| Year | 2003 |
| Number of layers | 5 |
| Film structure | ABCDE |
| Material | BOPP Thickness 10-70 my |
| Output | 2500 Kg/h. max 350m/min |
| Width (mm) | 6600 |
| Extruder 1 Description | A - SINGLE SCREW , diam 90mm, 4 components dosing system, output 180kg/h, AC motor New spare inverter available |
| Extruder 2 Description | B - SINGLE SCREW, diam 120mm, 3 components dosing system, output 400kg/h, AC motor New spare inverter available |
| Extruder 3 Description | C - TWIN SCREW diam 2x 139mm Co-rotating, gravimetric dosing unit: 4x pre-dosign + 2 x main, output 2800 kg/h. Customer bought in 2024 new motor SIEMENS for value of over 300 KEur |
| Extruder 4 Description | D - SINGLE SCREW 120mm, 3 components dosing system, output 400kg/h, AC motor New spare inverter available |
| Extruder 5 Description | E - SINGLE SCREW 90mm, 4 components dosing system, output 180kg/h, AC motor New spare inverter available |
| Head description | Make Simplas. Automatic thickness profile adjustment via 32 thermal bolts |
| Die width | 1025mm |
| Thickness controll system | Automatic thickness control system. Gauge bet rays |
| Chill roll unit | Chill roll in water bath. Gloss surface finish. |
| MDO description | - 14 x pre-heating rollers (6 chrome plated surface, 8 teflon surface). Diam of preheating rollers 614mm - 6 x stretching rollers - 2x Annealing rollers Rollers heated by thermal oil ( thermal oil heater included) Drive/transmission: Distribution gearbox, cordon shaft and belts |
| TDO description | - Pre heating section 15m length - Stretching section 12m length - Annealing section 12m length - Heat set section 5,2m length Heating via thermal oil Chain type 4.4.4 |
| Corona treatment | 2 x MERO treaters |
| Pull roll unit | Thickness gauge Themo Fischer type Beta rays, corona treatment 1 side, 3 generators, edge trim, In lince grinder make Hosokawa Alpine |
| Rewinder width | 6600mm net |
| Rewinder description | Turret type max diam 1200mm |
| Slitter | Atlas slitter, Driven unwinder, Rewinder with independent winding stations center driven, 12 x couple of arms/winding stations. driven position of winding stations. Max diam rewinder 1000mm |
| Note | Main extruder twin screw, 4 single screw extruder. Including oil heater, LPG fired Including water chiller Including 1 x compressor Sets of spare parts available PLC for Bruckner line: Siemens S7 |
MITSUBISHI
-
Machine Code: BO103
-
Year: 2004
-
Width (mm): 6700
WINDMÖLLER & HÖLSCHER W&H + Brückner CAST COEX TD3000
-
Machine Code: BO79
-
Year: 2002
-
Width (mm): 2800
DMT TDO unit for PVC shrink labels
-
Machine Code: BO68
-
Year: 2004
-
Width (mm): 2500