** SOLD **
Coatings used in packaging industry are various. Cold and hot seal coating are common. Also, cold and hot seal coatings are commonly used, as well as hot melt and wax coatings. Silicon, Pvdc coating, ant mist and many others are employed. Materials which can be coated with a certain machine depends highly on the type of coating unit(s) available, on machine's construction and equipment.
Ask more informations
about a similar one
- Machine Code
- LA117
- Manufacturer
- UTECO
- Modello
- HORIZON 503
- Year
- 1989
- Application
- Duplex lamination
- Type of lamination/coating
- SOLVENT / WATER BASED
- Working width (mm)
- 1450
- Speed
- 300 m /min(with cold seal 250m/min )
- First unwinder type
- TURRET
- Max diameter reel unwinder
- 800
- Secondary unwinder type
- TURRET
- Max diameter reel unwinder
- 800
- Rewinder type
- TURRET
- Max diameter reel rewinder
- 800
- Coating unit
- Laminating nip, one chrome plated steel roll diameter 250 mm with 1 rubber roller nip. One chill roll after laminating nip diam. 350 mm
- Drying
- Diathermic oil.Three-sections horizontal drying tunnel, with independent set-up for each section.Tunnel length : 10,2 m (this is the total length).Heating system by diathermic oil (3 independent heather-exchangers). Air supply: 6.000 m3/h each section; total 18.000 m3/h .Air speed: 40 m/sec .Exsausting air 18.000 m3/h .
- Register controll
- 2 ZELO for cold seal in register
- Corona treatment
- 2 x Ferrarini & Benelli for metallized materials, 8 kw each one
- Coating rollers
- Coating rollers data: 1x60 l/cm 44 µ, width 1400 mm ; 1x60 l/cm 42 µ, width 1400 mm;1x60 l/cm 32 µ, width 1400 mm ;1x60 l/cm 52 µ, width 1400 mm; 1x60 l/cm 46 µ, width 1400 mm
- Note
- Solvent base laminator with cold-seal in register; also suitable to coat full background color or lacquer . Ventilation (drying) system : Three-sections horizontal drying tunnel, with independent set-up for each section .Tunnel length : 10,2 m (this is the total length) .Heating system by diathermic oil (3 independent heather-exchangers). Air supply: 6.000 m3/h each section; total 18.000 m3/h .Air speed: 40 m/sec .Exsausting air 18.000 m3/h . Unwinders : Automatic splice .Cores inner diameter : 3 and 6 inches . Web tension control by dancing-roller . Web tension range : 3 up to 30 kg with taper 50% . Rewinder :Automatic splice cores inner diameter : 3 and 6 inches .Web tension control by dancing-roller .Web tension range : 5 up to 50 kg with taper 50% . Included in supply : Register control Zelo Elettronica, for cold seal in register .Temperature control systems .Web guiding system : N° 2 made by Fife . Preparing for future solvent less Trolley . Rotogravure trolley with precision mechanics tips .Repeat of engraved rollers : 450 up to 850 mm . Including in the supply the following engraved coating rollers: Repeat of engraved rollers : 450 up to 850 mm .Including in the supply the following engraved coating rollers: Screening 60# 40my Width (mm) 1500 Repeat (mm) 690 ; Screening 60# 44my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 42my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 32my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 52my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 46my Width (mm) 1400 Repeat (mm) 690
Machine Code | LA117 |
Manufacturer | UTECO |
Modello | HORIZON 503 |
Year | 1989 |
Application | Duplex lamination |
Type of lamination/coating | SOLVENT / WATER BASED |
Working width (mm) | 1450 |
Speed | 300 m /min(with cold seal 250m/min ) |
First unwinder type | TURRET |
Max diameter reel unwinder | 800 |
Secondary unwinder type | TURRET |
Max diameter reel unwinder | 800 |
Rewinder type | TURRET |
Max diameter reel rewinder | 800 |
Coating unit | Laminating nip, one chrome plated steel roll diameter 250 mm with 1 rubber roller nip. One chill roll after laminating nip diam. 350 mm |
Drying | Diathermic oil.Three-sections horizontal drying tunnel, with independent set-up for each section.Tunnel length : 10,2 m (this is the total length).Heating system by diathermic oil (3 independent heather-exchangers). Air supply: 6.000 m3/h each section; total 18.000 m3/h .Air speed: 40 m/sec .Exsausting air 18.000 m3/h . |
Register controll | 2 ZELO for cold seal in register |
Corona treatment | 2 x Ferrarini & Benelli for metallized materials, 8 kw each one |
Coating rollers | Coating rollers data: 1x60 l/cm 44 µ, width 1400 mm ; 1x60 l/cm 42 µ, width 1400 mm;1x60 l/cm 32 µ, width 1400 mm ;1x60 l/cm 52 µ, width 1400 mm; 1x60 l/cm 46 µ, width 1400 mm |
Note | Solvent base laminator with cold-seal in register; also suitable to coat full background color or lacquer . Ventilation (drying) system : Three-sections horizontal drying tunnel, with independent set-up for each section .Tunnel length : 10,2 m (this is the total length) .Heating system by diathermic oil (3 independent heather-exchangers). Air supply: 6.000 m3/h each section; total 18.000 m3/h .Air speed: 40 m/sec .Exsausting air 18.000 m3/h . Unwinders : Automatic splice .Cores inner diameter : 3 and 6 inches . Web tension control by dancing-roller . Web tension range : 3 up to 30 kg with taper 50% . Rewinder :Automatic splice cores inner diameter : 3 and 6 inches .Web tension control by dancing-roller .Web tension range : 5 up to 50 kg with taper 50% . Included in supply : Register control Zelo Elettronica, for cold seal in register .Temperature control systems .Web guiding system : N° 2 made by Fife . Preparing for future solvent less Trolley . Rotogravure trolley with precision mechanics tips .Repeat of engraved rollers : 450 up to 850 mm . Including in the supply the following engraved coating rollers: Repeat of engraved rollers : 450 up to 850 mm .Including in the supply the following engraved coating rollers: Screening 60# 40my Width (mm) 1500 Repeat (mm) 690 ; Screening 60# 44my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 42my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 32my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 52my Width (mm) 1400 Repeat (mm) 690 ;Screening 60# 46my Width (mm) 1400 Repeat (mm) 690 |
NORDMECCANICA SUPERSIMPLEX
-
Machine Code: LA304
-
Year: 1996
-
Working width (mm): 1400
CML MIRACH
-
Machine Code: LA350
-
Year: 2006
-
Working width (mm): 1220
S.A.M.
-
Machine Code: LA427
-
Year: 2017
-
Working width (mm): 1250
NORDMECCANICA SUPERCOMBI 4000
-
Machine Code: LA406
-
Year: 2018
-
Working width (mm): 1315
ITALFLEX 2000-80
-
Machine Code: LA391
-
Year: 2001
-
Working width (mm): 900
REMAK MIZAR Solventless
-
Machine Code: LA435
-
Year: 2017
-
Working width (mm): 1600