Coatings used in packaging industry are various. Cold and hot seal coating are common. Also, cold and hot seal coatings are commonly used, as well as hot melt and wax coatings. Silicon, Pvdc coating, ant mist and many others are employed. Materials which can be coated with a certain machine depends highly on the type of coating unit(s) available, on machine's construction and equipment.
Ask more informations
- Machine Code
- LA472
- Manufacturer
- ISOTEX
- Year
- 2014
- Application
- Coating
- Type of lamination/coating
- SOLVENT / WATER BASED
- Working width (mm)
- 1700
- Materials
- Paper laminates and film
- Speed
- 140 m/min
- First unwinder type
- 2 Shaft unwinder with materials strorage for non stop splicing. Material accumulation/storage for reel change, 120m material
- Max diameter reel unwinder
- 1000
- Rewinder type
- Turret with flying slice
- Max diameter reel rewinder
- 1000
- Coating unit
- Revers roll coating unit. Doing roller 292mm diam, Coating roller 292mm diam, counter impression roller 350 diam. Smoothening colander with 30KW IR drying
- Drying
- Drying tunnel total length 15m . 5 hoods of 3m each. Max temperature 250 C, 5 drying zones with 5in-blow fans inverter controlled,. Exhaust suction 3 fans inverter controlled. Heat source with 5 gas burners. In combination with Infra red drying
- Note
- Install power approx 192 kW (including IR) Coating thickness gauge, type beta rays, source Kr85.
| Machine Code | LA472 |
| Manufacturer | ISOTEX |
| Year | 2014 |
| Application | Coating |
| Type of lamination/coating | SOLVENT / WATER BASED |
| Working width (mm) | 1700 |
| Materials | Paper laminates and film |
| Speed | 140 m/min |
| First unwinder type | 2 Shaft unwinder with materials strorage for non stop splicing. Material accumulation/storage for reel change, 120m material |
| Max diameter reel unwinder | 1000 |
| Rewinder type | Turret with flying slice |
| Max diameter reel rewinder | 1000 |
| Coating unit | Revers roll coating unit. Doing roller 292mm diam, Coating roller 292mm diam, counter impression roller 350 diam. Smoothening colander with 30KW IR drying |
| Drying | Drying tunnel total length 15m . 5 hoods of 3m each. Max temperature 250 C, 5 drying zones with 5in-blow fans inverter controlled,. Exhaust suction 3 fans inverter controlled. Heat source with 5 gas burners. In combination with Infra red drying |
| Note | Install power approx 192 kW (including IR) Coating thickness gauge, type beta rays, source Kr85. |
NORDMECCANICA ZENIT
-
Machine Code: LA250
-
Year: 1990
-
Working width (mm): 1300
ROTOMEC duplex
-
Machine Code: LA426
-
Year: 1980
-
Working width (mm): 800
KBA FLEXOTECNICA
-
Machine Code: LA492
-
Year: 2020
-
Working width (mm): 1300
NORDMECCANICA Super Simplex 1500
-
Machine Code: LA502
-
Year: 2014
-
Working width (mm): 1500
TECMO Elflex 1400 VA 7
-
Machine Code: LA487
-
Year: 1970
-
Working width (mm): 1330
NORDMECCANICA SIMPLEX COMBI
-
Machine Code: LA336
-
Year: 1996
-
Working width (mm): 1300