- Machine Code
- PC14
- Manufacturer
- VIRGINIO
- Modello
- MAI
- Year
- 1997
- Number of layers
- 3
- Material
- PMMA/ PMMA -PMMA/ABS . Sheets thickness from 3 to 7 mm.
- Sheet width (mm)
- 1800
- Extruder 1 Layer ref:
- A
- Screw diam
- 60mm
- Description
- L/D 35, bimetallic barrel, degassing, stellited screws refurbished year 2011, Maag Pump 28SP - 10.2 cc – screen changer Cofit CL 80 - vacuum system HYDROSYS Travaini - 2 bbl stainless steel condenser vent , static mixer layer: Sulzer ;
- Extruder 2 Layer ref:
- B
- Screw diam
- 75mm
- Description
- L/D35 ; bimetallic barrel, degassing, stellited screw , pump EPROTEC MELTX1 - 25.5 cc (year 2007) - screen changer Cofit CL 80 - vacuum system HYDROSYS Travaini - 2 bbl stainless steel condenser vent , Static mixer cross-helices;
- Extruder 3 Layer ref:
- C
- Screw diam
- 90mm
- Description
- L/D 35mm ; bimetallic barrel, degassing, stellited screws , Maag Pump 45SP - 46.3 cc – screen changer Cofit C CL 100 - vacuum system HYDROSYS Travaini - 2 bbl stainless steel condenser vent , Static mixer cross-helices .
- Head description
- Ultraflow 4 layer feedblock for layers ABCD, year 2007. Currently running on layers ABC. Feedblock allows for adding one more co-extruder. Sheet die EDI HRC 100 fast gap year 2007, 1850wide, 2.5-10mm gap range. Adjustable decals for fast width adjustment.Spare die with EDI Ultraflex HRC100 FAST GAP1400 wide + COESTRUSION BLOCK Ultraflow layer 4 (A / B / C / D)
- Die width (mm)
- 1850mm
- Polishing stack/ calender lines unit
- Sheet polishing unit VM 3 roll 1.800 mm ; 340 mm diameter, servo drive for each roll, hydraulic nip, motor nip adjustment.? Three reels 45° calender : Bending angle of 45 °, upper cylinder oscillating, cylinders hardened with 3 mm steel aisi 420, chrome, superfinite ( one spare cylinder + one epicicloydal gear reducer ) , Thermostatic pressurized water cylinders # 1 by three-way unit Sella maximum temperature 140 ° C ; ? Steel reels chassis to support the sheet out from calendering station : reels are made of steel having surface chrome hardened and superfinite and driven . Reels are feeded with thermostated water whose temperature is controlled thru unit pressurized water temperature control . A series of rubber covered rolls , having surface temperature controlled , follows the steel rolls : either steel and rubber rolls are assembled on a moving frame whose inclination can be varied accordingly ;
- Note
- Output : up to 450 kg/h PMMA coextruded sheet.Additional conveyor cooling rolls with water temperature control. Transversal including chips exhauster .PE foil masking unit top & bottom Position adjustable up & down the conveyor.3 x in line cutting saw with motorized adjustment :Dust exhauster included. Transversal travelling saw with dust exhauster.Output conveyor with sheet stacker and weigh scale. MD ( machine direction ) cutting group : the group consists of three longitudinal cutting saw blades, the blades change in position is driven by motor ; TD ( transversal direction ) cutting group : group of cutting circular blade operated by numerical control. Cleaning station : Plate by vacuum cleaning system installed after TD cuts.Deionizing station : Plant ionization plate. Spare parts list : N°1 spare cylinder for calander ; N° 1 spare epicicloydal gearbox backlash free for calander / pulling; N° 1 overhauled engine gearbox extruder 90 mm diameter;N° 1 new engine + vacuum pump HYDROSYS Travaini for extruder 90 mm diameter; N° 1 new engine + vacuum pump HYDROSYS Travaini for extruder 75/60 mm diameter; N° 1 new epicicloydal gearbox backlash free; N° 1 upper body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1400 ; material CPM 9V steel.N° 1 lower body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1400 ; material CPM 9V steel .N° 1 upper body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1850 ; material CPM 9V steel. N° 1 lower body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1850 ; material CPM 9V steel
Machine Code | PC14 |
Manufacturer | VIRGINIO |
Modello | MAI |
Year | 1997 |
Number of layers | 3 |
Material | PMMA/ PMMA -PMMA/ABS . Sheets thickness from 3 to 7 mm. |
Sheet width (mm) | 1800 |
Extruder 1 Layer ref: | A |
Screw diam | 60mm |
Description | L/D 35, bimetallic barrel, degassing, stellited screws refurbished year 2011, Maag Pump 28SP - 10.2 cc – screen changer Cofit CL 80 - vacuum system HYDROSYS Travaini - 2 bbl stainless steel condenser vent , static mixer layer: Sulzer ; |
Extruder 2 Layer ref: | B |
Screw diam | 75mm |
Description | L/D35 ; bimetallic barrel, degassing, stellited screw , pump EPROTEC MELTX1 - 25.5 cc (year 2007) - screen changer Cofit CL 80 - vacuum system HYDROSYS Travaini - 2 bbl stainless steel condenser vent , Static mixer cross-helices; |
Extruder 3 Layer ref: | C |
Screw diam | 90mm |
Description | L/D 35mm ; bimetallic barrel, degassing, stellited screws , Maag Pump 45SP - 46.3 cc – screen changer Cofit C CL 100 - vacuum system HYDROSYS Travaini - 2 bbl stainless steel condenser vent , Static mixer cross-helices . |
Head description | Ultraflow 4 layer feedblock for layers ABCD, year 2007. Currently running on layers ABC. Feedblock allows for adding one more co-extruder. Sheet die EDI HRC 100 fast gap year 2007, 1850wide, 2.5-10mm gap range. Adjustable decals for fast width adjustment.Spare die with EDI Ultraflex HRC100 FAST GAP1400 wide + COESTRUSION BLOCK Ultraflow layer 4 (A / B / C / D) |
Die width (mm) | 1850mm |
Polishing stack/ calender lines unit | Sheet polishing unit VM 3 roll 1.800 mm ; 340 mm diameter, servo drive for each roll, hydraulic nip, motor nip adjustment.? Three reels 45° calender : Bending angle of 45 °, upper cylinder oscillating, cylinders hardened with 3 mm steel aisi 420, chrome, superfinite ( one spare cylinder + one epicicloydal gear reducer ) , Thermostatic pressurized water cylinders # 1 by three-way unit Sella maximum temperature 140 ° C ; ? Steel reels chassis to support the sheet out from calendering station : reels are made of steel having surface chrome hardened and superfinite and driven . Reels are feeded with thermostated water whose temperature is controlled thru unit pressurized water temperature control . A series of rubber covered rolls , having surface temperature controlled , follows the steel rolls : either steel and rubber rolls are assembled on a moving frame whose inclination can be varied accordingly ; |
Note | Output : up to 450 kg/h PMMA coextruded sheet.Additional conveyor cooling rolls with water temperature control. Transversal including chips exhauster .PE foil masking unit top & bottom Position adjustable up & down the conveyor.3 x in line cutting saw with motorized adjustment :Dust exhauster included. Transversal travelling saw with dust exhauster.Output conveyor with sheet stacker and weigh scale. MD ( machine direction ) cutting group : the group consists of three longitudinal cutting saw blades, the blades change in position is driven by motor ; TD ( transversal direction ) cutting group : group of cutting circular blade operated by numerical control. Cleaning station : Plate by vacuum cleaning system installed after TD cuts.Deionizing station : Plant ionization plate. Spare parts list : N°1 spare cylinder for calander ; N° 1 spare epicicloydal gearbox backlash free for calander / pulling; N° 1 overhauled engine gearbox extruder 90 mm diameter;N° 1 new engine + vacuum pump HYDROSYS Travaini for extruder 90 mm diameter; N° 1 new engine + vacuum pump HYDROSYS Travaini for extruder 75/60 mm diameter; N° 1 new epicicloydal gearbox backlash free; N° 1 upper body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1400 ; material CPM 9V steel.N° 1 lower body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1400 ; material CPM 9V steel .N° 1 upper body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1850 ; material CPM 9V steel. N° 1 lower body ALT lip insert for EDI Ultraflex HRC100 FAST GAP 1850 ; material CPM 9V steel |
NANJING
-
Machine Code: PC35
-
Year: 2017
-
Sheet width (mm): 1350
PLASCO-BAUSANO - ESDE- KAMPF MD75-MEDICA
-
Machine Code: PC38
-
Year: 2018
-
Sheet width (mm): 600
KUHNE KF70E-45E-4/900
-
Machine Code: PC37
-
Year: 1995