** SOLD **
These employ an interchangeable trolley system which allows different types of coatings or laminations depending on available trolleys.
Ask more informations
about a similar one
- Machine Code
- LA302
- Manufacturer
- GHEZZI & ANNONI
- Modello
- HOTMELT
- Year
- 2002
- Application
- Coating
- Type of lamination/coating
- Hot melt
- Working width (mm)
- 1650
- Materials
- BOPP, Celofan, Masking tape, Polythene Strapping, Reinforced
- Speed
- Mechanical speed : 350 m/min Machine running speed: 300 m/min (18g/m2 adhesive)
- First unwinder type
- Jumbo
- Max diameter reel unwinder
- 1000
- Rewinder type
- Jumbo
- Max diameter reel rewinder
- 1000
- Coating unit
- 1 by Mayer bar
- Second Coating unitr
- 2 extruders
- Drying
- Thermic oil - Electric for die
- Note
- Winder was replaced in 2007 with a newer one scrapless. Automatic duplex Unwinder auto splice Release Unit completed with TRESU closed Dr Blade Adhesive coating die ( Simplas ) Adhesive preparation Unit Automatic duplex Rewinder auto splice LEL System + LEL Alert Hotmelt Adhesive filter : mahle system Edge guide unit : 1-before coating die 1-before rewinder Hotmelt adhesive: 12g/m2 – 120 g/m2 Temperature: Between 100-200°C Adhesive : Mixed with SIS rubber and SBS Viscosity: Between 10,000 – 100,000 CPS Release Drying Tunnels; 1 Oven with a total heating power 350.000Kcal/h Total Air flow: 18,000m3/h Max working temperature: 120°C Entrance temperature: 20°C Air absorption capacity: 14,000Nm3/h approx.
| Machine Code | LA302 |
| Manufacturer | GHEZZI & ANNONI |
| Modello | HOTMELT |
| Year | 2002 |
| Application | Coating |
| Type of lamination/coating | Hot melt |
| Working width (mm) | 1650 |
| Materials | BOPP, Celofan, Masking tape, Polythene Strapping, Reinforced |
| Speed | Mechanical speed : 350 m/min Machine running speed: 300 m/min (18g/m2 adhesive) |
| First unwinder type | Jumbo |
| Max diameter reel unwinder | 1000 |
| Rewinder type | Jumbo |
| Max diameter reel rewinder | 1000 |
| Coating unit | 1 by Mayer bar |
| Second Coating unitr | 2 extruders |
| Drying | Thermic oil - Electric for die |
| Note | Winder was replaced in 2007 with a newer one scrapless. Automatic duplex Unwinder auto splice Release Unit completed with TRESU closed Dr Blade Adhesive coating die ( Simplas ) Adhesive preparation Unit Automatic duplex Rewinder auto splice LEL System + LEL Alert Hotmelt Adhesive filter : mahle system Edge guide unit : 1-before coating die 1-before rewinder Hotmelt adhesive: 12g/m2 – 120 g/m2 Temperature: Between 100-200°C Adhesive : Mixed with SIS rubber and SBS Viscosity: Between 10,000 – 100,000 CPS Release Drying Tunnels; 1 Oven with a total heating power 350.000Kcal/h Total Air flow: 18,000m3/h Max working temperature: 120°C Entrance temperature: 20°C Air absorption capacity: 14,000Nm3/h approx. |
UTECO Rainbow TH
-
Machine Code: LA234
-
Year: 1993
-
Working width (mm): 1000
NORDMECCANICA Combi Lab
-
Machine Code: LA460
-
Year: 2000
-
Working width (mm): 440
SCHIAVI Eco Convert Junior
-
Machine Code: LA470
-
Year: 1996
-
Working width (mm): 1300
NORDMECCANICA Super Simplex 1500
-
Machine Code: LA501
-
Year: 2004
-
Working width (mm): 1500
MB HOT MELT, WAX COATER LAMINATOR
-
Machine Code: LA356
-
Year: 2002
-
Working width (mm): 1700
POLYTYPE POLYTYPE 522
-
Machine Code: LA348
-
Year: 1982
-
Working width (mm): 1040