3 layers MACCHI COEX Blown film extrusion line ** SOLD ** Ask more informations about a similar one
Raw material most commonly used are low density polyethylene (LDPE) and High density polyethylene (HDPE). These are often used in blends with other polymers and additives.
| Machine Code | EX389 |
| Manufacturer | MACCHI |
| Model | COEX |
| Year | 1999 |
| Number of layers | 3 |
| Film structure | ABC |
| Material | LDPE, LLDPE, blend HDPE |
| Film Width (mm) | 1750 |
| Output (Kg/h) | 250 kg/h |
| Extruder 1 Layer ref: | A |
| Screw diam | 65 mm |
| Description | Plastex 65/30 D ,Gravimetric system control Gravikontrol |
| Extruder 2 Layer ref: | B |
| Screw diam | 80 mm |
| Description | Plastex 80/30 D, Gravimetric system control Gravikontrol |
| Extruder 3 Layer ref: | C |
| Screw diam | 65 mm |
| Description | Plastex 65/30 D, Gravimetric system control Gravikontrol |
| Head description | fixed head. Gap 1,4 mm , Cooling ring ASR 3 with double flow.IBC Type Jet 3 cooling control system |
| Die diam (mm) | 400 |
| Take off unit | Rotating ST 199 roto - 1800 |
| Web guide | E+L edge guide system |
| Rewinder max reel diameter | 1800 mm |
| Rewinder description | Double automatic winder BO Plus/D 1800 with slitting and cutting knifes. |
| Additional information | Bubble guide type GSRC 1800/8+6 R ; Water cooling system for extruders ;Ceramic heater for heating separate for 4 zones with infrared heater tape.Barrel cooling by means of 4 independent air fans .Manual screenchanger with lever type. |
** SOLD **
You may also be interested in:
DOLCI COEX 90/120/90
Category: Film extrusion lines
Subcategory: Blown film
Film Width (mm): 3700
Year: 1998
ZOCCHI 55-1.200-RD
Category: Film extrusion lines
Subcategory: Blown film
Film Width (mm): 1200
Year: 1996