** SOLD **
Material is stretched in machine in a transversal direction simultaneously. This processe delivers a molecule orientation in both axes, and this enhances many of their properties.
Ask more informations
about a similar one
- Machine Code
- TB11
- Manufacturer
- KUREHA
- Year
- 2014
- Type
- Triple bubble
- Number of layers
- 7
- Film structure
- ABCDEFG
- Material
- Barrier tubular and lid shrinkable at low temperature. (e.g.: PE-PE-tie-EVOH-PA-tie-PET. Flowvac.
- Output
- max output 240 Kg/h. max speed at winder 120 m/min
- Film width (mm)
- 1100
- Extruders
- Resin dryer for extruder D, E, G Extruder A: screw 65mm diam L/D28, output 12-70 kg/h, max 100rpm Gravimertic doser 4 comp Extruder B: screw 65mm diam L/D28, output 12-70 kg/h, max 100rpm Gravimertic doser 4 comp Extruder C: screw 35mm diam L/D24, output 2-8 kg/h, max 100rpm Gravimertic doser 1 comp Extruder D: screw 60mm diam L/D28, output 9-44 kg/h, max 100rpm Gravimertic doser 4 comp Extruder E: screw 70mm diam L/D28, output 35-100 kg/h, max 100rpm Gravimertic doser 4 comp Extruder F: screw 35mm diam L/D24, output 2-8 kg/h, max 100rpm Gravimertic doser 1 comp Extruder G: screw 35mm diam L/D24, output 6-17kg/h, max 100rpm Gravimertic doser 1 comp
- Head
- Make Reifenhauser. die Diam: 170 - 200 - 230mm. Water cooling. Calibrators available of different sizes. Max lay flat after calibration 500mm, cooling length 1180-1830mm
- Stretching
- STRETCHING: Heat Bath: Moist heat and dry heat bath. Pinch system. Typical Speed 64 m/min, rollers face length 500mm, Heating length 418-2450mm Stretching: Bubble size: Bubble diameter range: 280-765mm, layflat film width 400-1200mm Cooling length: 6500-7500mm Take off: Max speed after stretching 100m/min, Rollers face width 1350mm, double motor drive HT: Max speed input 103m/min Relaxation: -30% to +10% Heat tunnel size: diam 1000mm , length 3500mm Heating HD + air Damper/Sliding length:4500mm Roller face width 1250mm Thickness gauge
- Rewinder
- Max winding width 1100mm, Rollers face width 1350mm, max speed 120 m/min, max diam 632mm
- Note
- Lay flat width produced 400-1000mm
| Machine Code | TB11 |
| Manufacturer | KUREHA |
| Year | 2014 |
| Type | Triple bubble |
| Number of layers | 7 |
| Film structure | ABCDEFG |
| Material | Barrier tubular and lid shrinkable at low temperature. (e.g.: PE-PE-tie-EVOH-PA-tie-PET. Flowvac. |
| Output | max output 240 Kg/h. max speed at winder 120 m/min |
| Film width (mm) | 1100 |
| Extruders | Resin dryer for extruder D, E, G Extruder A: screw 65mm diam L/D28, output 12-70 kg/h, max 100rpm Gravimertic doser 4 comp Extruder B: screw 65mm diam L/D28, output 12-70 kg/h, max 100rpm Gravimertic doser 4 comp Extruder C: screw 35mm diam L/D24, output 2-8 kg/h, max 100rpm Gravimertic doser 1 comp Extruder D: screw 60mm diam L/D28, output 9-44 kg/h, max 100rpm Gravimertic doser 4 comp Extruder E: screw 70mm diam L/D28, output 35-100 kg/h, max 100rpm Gravimertic doser 4 comp Extruder F: screw 35mm diam L/D24, output 2-8 kg/h, max 100rpm Gravimertic doser 1 comp Extruder G: screw 35mm diam L/D24, output 6-17kg/h, max 100rpm Gravimertic doser 1 comp |
| Head | Make Reifenhauser. die Diam: 170 - 200 - 230mm. Water cooling. Calibrators available of different sizes. Max lay flat after calibration 500mm, cooling length 1180-1830mm |
| Stretching | STRETCHING: Heat Bath: Moist heat and dry heat bath. Pinch system. Typical Speed 64 m/min, rollers face length 500mm, Heating length 418-2450mm Stretching: Bubble size: Bubble diameter range: 280-765mm, layflat film width 400-1200mm Cooling length: 6500-7500mm Take off: Max speed after stretching 100m/min, Rollers face width 1350mm, double motor drive HT: Max speed input 103m/min Relaxation: -30% to +10% Heat tunnel size: diam 1000mm , length 3500mm Heating HD + air Damper/Sliding length:4500mm Roller face width 1250mm Thickness gauge |
| Rewinder | Max winding width 1100mm, Rollers face width 1350mm, max speed 120 m/min, max diam 632mm |
| Note | Lay flat width produced 400-1000mm |
TECNOVA
-
Machine Code: TB5
-
Year: 1990
-
Film width (mm): 1780
TECHNO COATING ENGINEERING
-
Machine Code: TB17
-
Year: 2000
-
Film width (mm): 2500
KUHNE
-
Machine Code: TB8
-
Year: 2011
-
Film width (mm): 1500
KUHNE
-
Machine Code: TB15
-
Year: 2008
-
Film width (mm): 500