A duplex laminator will join 2 layers of web, a triplex lamination machine will join 3 layers together in one pass. An extrusion coater will only coat a layer of polymer (typically PE) on a support.
Ask more informations
- Machine Code
- EC57
- Manufacturer
- DAVIS STANDARD - ERWEPA
- Year
- 2012
- Width (mm)
- 1500
- Coating/lamination units
- 2
- Coating/lamination unit 1 description
- - Direct and reverse gravure coating unit - Chamber doctor balde system TRESU and ceramic engraved roller - Electrostatic charge - 2 drying hoods of 2.200mm lengths each ( 4.400 mm total) - Independent in blower for each hood - 2 electric heaters, one for each hood - Air temperature up to 110-120 C
- Coating/lamination unit 2 description
- Extrusion coating and lamination unit. - Extruder carriage 3 way movement - Davis Standard extruder 6" screw diameter, extrusion output 837 kg/h - AC drive for extruder 375 kW - Die width 800-1700mm with internal deckling system - Automatic thickness profile control vis thermal bolts and flex lip. 63 die bolt - Die gap 0.7-1.2mm - Primary chill roll face width 1800mm, diameter 700mm - Teflon tape system with manual adjustment of lamination - Back up roll 300mm - Pressure roll 150mm - Take off roll 150mm - Pull roll 300mm - Razor blade edge cut system and trim exhaust Venturi fan
- Primary unwinder description
- - Turret type - Max reel diam 1000mm (possible to increase to 1200mm) - Splicing in both direction - Cores 76mm , 152mm - Material paper, film and laminates - web tension: 55-550 N
- Secondary unwinder description
- - Turret type - Max reel diam 1000mm (possible to increase to 1200mm) - Splicing in both direction - Cores 76mm , 152mm - Alu foil (starting from 5.5my), film and laminates - Web tension 45-450 N
- Rewinder description
- - Turret type - Max reel diam 1000mm (possible to increase to 1200mm) - Splicing in both direction - Min reel ram for splicing 300mm - Cores 76mm , 152mm - Laminates 35-250 gsm - web tension: 110-1100 N
- Speed
- 300 m/min
- Product structure / Materials
- Paper 40-150 gsm, PE,PP, PET films, Alu foil
- Note
- - Machine has very low amount of working hours - AC drives Siemens Sinamics, PLC Siemens S7 - Min-Max width 750-1500mm - Die and idle rollers 1700mm wide - Web tension between pull roll 1 and pull roll 2 90-900 N - 2 Eltex antistatic base - FIFE web guides with automatic sensor position - Paper humidification make Nikko - Water pumping and thermo regulation unit
| Machine Code | EC57 |
| Manufacturer | DAVIS STANDARD - ERWEPA |
| Year | 2012 |
| Width (mm) | 1500 |
| Coating/lamination units | 2 |
| Coating/lamination unit 1 description | - Direct and reverse gravure coating unit - Chamber doctor balde system TRESU and ceramic engraved roller - Electrostatic charge - 2 drying hoods of 2.200mm lengths each ( 4.400 mm total) - Independent in blower for each hood - 2 electric heaters, one for each hood - Air temperature up to 110-120 C |
| Coating/lamination unit 2 description | Extrusion coating and lamination unit. - Extruder carriage 3 way movement - Davis Standard extruder 6" screw diameter, extrusion output 837 kg/h - AC drive for extruder 375 kW - Die width 800-1700mm with internal deckling system - Automatic thickness profile control vis thermal bolts and flex lip. 63 die bolt - Die gap 0.7-1.2mm - Primary chill roll face width 1800mm, diameter 700mm - Teflon tape system with manual adjustment of lamination - Back up roll 300mm - Pressure roll 150mm - Take off roll 150mm - Pull roll 300mm - Razor blade edge cut system and trim exhaust Venturi fan |
| Primary unwinder description | - Turret type - Max reel diam 1000mm (possible to increase to 1200mm) - Splicing in both direction - Cores 76mm , 152mm - Material paper, film and laminates - web tension: 55-550 N |
| Secondary unwinder description | - Turret type - Max reel diam 1000mm (possible to increase to 1200mm) - Splicing in both direction - Cores 76mm , 152mm - Alu foil (starting from 5.5my), film and laminates - Web tension 45-450 N |
| Rewinder description | - Turret type - Max reel diam 1000mm (possible to increase to 1200mm) - Splicing in both direction - Min reel ram for splicing 300mm - Cores 76mm , 152mm - Laminates 35-250 gsm - web tension: 110-1100 N |
| Speed | 300 m/min |
| Product structure / Materials | Paper 40-150 gsm, PE,PP, PET films, Alu foil |
| Note | - Machine has very low amount of working hours - AC drives Siemens Sinamics, PLC Siemens S7 - Min-Max width 750-1500mm - Die and idle rollers 1700mm wide - Web tension between pull roll 1 and pull roll 2 90-900 N - 2 Eltex antistatic base - FIFE web guides with automatic sensor position - Paper humidification make Nikko - Water pumping and thermo regulation unit |
HAN YOUNG Extrusion lamination
-
Machine Code: EC32
-
Year: 2005
-
Width (mm): 2200
BOBST ROTOEXTRUDER 400F 1300/400
-
Machine Code: EC51
-
Year: 2018
-
Width (mm): 1300
SML - STARLINGER
-
Machine Code: EC40
-
Year: 2000
-
Width (mm): 1550
HAN YOUNG extrusion lamination
-
Machine Code: EC31
-
Year: 2001
-
Width (mm): 1500
KUHNE/ SML
-
Machine Code: EC48
-
Year: 2006
-
Width (mm): 1180
S.A.M.
-
Machine Code: EC56
-
Year: 2000
-
Width (mm): 1250