- Codice Macchina
- BO47
- Manufacturer
- BRUCKNER
- Year
- 1996
- Numero di strati
- 3
- Rinnovo
- 2005/2012
- Materiali
- BOPP
- Larghezza (mm)
- 6600
- Extruder 1 Description
- MAIN EXTRUDER: CASCADE TYPE; MANUF: BANDERA; MELT 200mm diam; L/D 24; Extrusion rate: 2400kg/h; Screw speed: 195RPM; drive: 2 x 430kw DC motor; Electric heating:160kw; New screws in 2005
- Extruder 2 Description
- COEX1: MANUF: BANDERA; METRING; SCREW DIAM 250; L/D 250mm diam;Extrusion rate: 2400kg/h; Screw speed: 90RPM; drive: 1 X 430kwDC motor; Eletric heating: 145kw;New screws in 2005
- Extruder 3 Description
- COEX 2: MANUF: BANDERA; Screw diam 100mm; L/D 32; Extrusion rate: 250kg/h; Screw speed: 120RPM; drive: 117kw; Eletric heating: 50kw;New screws in 2005
- Descrizione testa
- Gap 1.7-3.5
- Die width
- 912
- Controllo di spessore
- Yes; In 2008 gage control system was upgraded (Original, Thermo Fisher)
- Unità chill roll
- Waterbath system; Diam 2200; Width 1200; Renaovated in 2012
- Descrizione MDO
- CO14/6-2/2-90;Roll width: 1.1m, working width: 900mm; 14 pcs preheat roll (614mm); 6 pcs stretching rolls (150mm); 2 hot-setting roll (614mm); In 2012 preheat roller, heat-setting roller coated with chrome, and the drive inverter upgraded too
- Descrizione TDO
- 61CO15EP/12/12/3/61/660/444; INFEED: Imported width: 650 ~ 800mm, outlet width: 6 ~ 6.9m; maximum tensile width: 7.5m, total length: 51m, fan total number of units: 42; inlet section: 1.5m, preheating section: 15m, stretch segment: 12m heatset sections: 12m, neutral segments: 3m, cooling section: 6m, exit segment: 1.5m; n 2008 clip opening and closing changed into a magnetic clip (Bruckner), added 1 set heat recovery for TDO bake (Yancheng Avion), & TDO bake increase fan frequency control devices. In 2012 TDO chain drive inverter and fan inverters upgraded
- Trattamento Corona
- Yes, In 2008 & 2012, 2 # Corona, 3 # Corona were upgraded (Original MERO)
- Taglia cordona
- ATLAS; Unwinding maximum film width: 6.6m, maximum Rewinding diameter: 1.0m; slitting width: 0.4 ~ 2.2m; maximum operating speed: 1000 m / min; 2012 update winding arm motor control system upgradee (Siemens)
- Ulteriori informazioni
- Raw material storsge transport system; Three layer die li; Manuf Bruckner; Model: 3A912; Width: 912mm; Dip width: 1.7~3.5mm, Electric heating 145kw, 32pcs Thermal expansion bolts; In 2008 die bolt control system was changed; Inline edge cut grinding and refeeding system; TDO : hot oil boiler included; In 2013 the burner was changed to natural gas burner; Air Compressor included from ATLAS COPCO; Chiller included from SRMW Material BOPP range 12-60my;
Codice Macchina | BO47 |
Manufacturer | BRUCKNER |
Year | 1996 |
Numero di strati | 3 |
Rinnovo | 2005/2012 |
Materiali | BOPP |
Larghezza (mm) | 6600 |
Extruder 1 Description | MAIN EXTRUDER: CASCADE TYPE; MANUF: BANDERA; MELT 200mm diam; L/D 24; Extrusion rate: 2400kg/h; Screw speed: 195RPM; drive: 2 x 430kw DC motor; Electric heating:160kw; New screws in 2005 |
Extruder 2 Description | COEX1: MANUF: BANDERA; METRING; SCREW DIAM 250; L/D 250mm diam;Extrusion rate: 2400kg/h; Screw speed: 90RPM; drive: 1 X 430kwDC motor; Eletric heating: 145kw;New screws in 2005 |
Extruder 3 Description | COEX 2: MANUF: BANDERA; Screw diam 100mm; L/D 32; Extrusion rate: 250kg/h; Screw speed: 120RPM; drive: 117kw; Eletric heating: 50kw;New screws in 2005 |
Descrizione testa | Gap 1.7-3.5 |
Die width | 912 |
Controllo di spessore | Yes; In 2008 gage control system was upgraded (Original, Thermo Fisher) |
Unità chill roll | Waterbath system; Diam 2200; Width 1200; Renaovated in 2012 |
Descrizione MDO | CO14/6-2/2-90;Roll width: 1.1m, working width: 900mm; 14 pcs preheat roll (614mm); 6 pcs stretching rolls (150mm); 2 hot-setting roll (614mm); In 2012 preheat roller, heat-setting roller coated with chrome, and the drive inverter upgraded too |
Descrizione TDO | 61CO15EP/12/12/3/61/660/444; INFEED: Imported width: 650 ~ 800mm, outlet width: 6 ~ 6.9m; maximum tensile width: 7.5m, total length: 51m, fan total number of units: 42; inlet section: 1.5m, preheating section: 15m, stretch segment: 12m heatset sections: 12m, neutral segments: 3m, cooling section: 6m, exit segment: 1.5m; n 2008 clip opening and closing changed into a magnetic clip (Bruckner), added 1 set heat recovery for TDO bake (Yancheng Avion), & TDO bake increase fan frequency control devices. In 2012 TDO chain drive inverter and fan inverters upgraded |
Trattamento Corona | Yes, In 2008 & 2012, 2 # Corona, 3 # Corona were upgraded (Original MERO) |
Taglia cordona | ATLAS; Unwinding maximum film width: 6.6m, maximum Rewinding diameter: 1.0m; slitting width: 0.4 ~ 2.2m; maximum operating speed: 1000 m / min; 2012 update winding arm motor control system upgradee (Siemens) |
Ulteriori informazioni | Raw material storsge transport system; Three layer die li; Manuf Bruckner; Model: 3A912; Width: 912mm; Dip width: 1.7~3.5mm, Electric heating 145kw, 32pcs Thermal expansion bolts; In 2008 die bolt control system was changed; Inline edge cut grinding and refeeding system; TDO : hot oil boiler included; In 2013 the burner was changed to natural gas burner; Air Compressor included from ATLAS COPCO; Chiller included from SRMW Material BOPP range 12-60my; |
MITSUBISHI
-
Codice Macchina: BO74
-
Year: 1980
-
Larghezza (mm): 5500
BRUCKNER - DORNIER
-
Codice Macchina: BO80
-
Year: 1994
-
Larghezza (mm): 8300
MITSUBISHI
-
Codice Macchina: BO75
-
Year: 2003
-
Larghezza (mm): 8300
BRUCKNER - DORNIER
-
Codice Macchina: BO76
-
Year: 1994
-
Larghezza (mm): 8300
BRUCKNER
-
Codice Macchina: BO81
-
Year: 1992
-
Larghezza (mm): 8200
BRUCKNER
-
Codice Macchina: BO77
-
Year: 1999
-
Larghezza (mm): 6600