- Maschinencode
- CB-CM16
- Hersteller
- LANGSTON
- Modello
- SATURN III Printer Slotter Model 5113
- Baujahr
- 2001
- Nominal Width (mm)
- 2870
- Max sheet width (mm)
- 2870
- Max sheet lenght (mm)
- 1232
- Gearless
- No
- Max board thickness (mm)
- 9 mm
- Set up system
- manual
- Pre feeder
- Serco Holland Topfeeder model FM 593
- Printer
- No
- Num of colours
- 2
- Inking system
- pump
- Rotary die cutter
- No
- Slotter unit
- yes
- Folder gluer unit
- valco flexoseal guns
- Counter ejector
- Counter and ejector section with box squarring
- Note
- Available immediatly. mounted bat not in production. Die cutting: Maximum cutting size: 1232 x 2870mm Minimum cutting size: 279 x 594mm Tools cylinder diameter: 360,4mm Tool wood thickness: 12,7mm Inking station: 2 colors Maximum printing surface: 1219 x 2705mm Support film cylinder diameter: 390mm Film thickness: 5,5mm Basic requirements: Power: 380V Langston: 93KVA (460V and 110V for controls) Compressed air: 5,6bars, Q= 80 m3/hr running, 170 m3/hr during setting Water: T= 43°C, P= 2,5bars
| Maschinencode | CB-CM16 |
| Hersteller | LANGSTON |
| Modello | SATURN III Printer Slotter Model 5113 |
| Baujahr | 2001 |
| Nominal Width (mm) | 2870 |
| Max sheet width (mm) | 2870 |
| Max sheet lenght (mm) | 1232 |
| Gearless | No |
| Max board thickness (mm) | 9 mm |
| Set up system | manual |
| Pre feeder | Serco Holland Topfeeder model FM 593 |
| Printer | No |
| Num of colours | 2 |
| Inking system | pump |
| Rotary die cutter | No |
| Slotter unit | yes |
| Folder gluer unit | valco flexoseal guns |
| Counter ejector | Counter and ejector section with box squarring |
| Note | Available immediatly. mounted bat not in production. Die cutting: Maximum cutting size: 1232 x 2870mm Minimum cutting size: 279 x 594mm Tools cylinder diameter: 360,4mm Tool wood thickness: 12,7mm Inking station: 2 colors Maximum printing surface: 1219 x 2705mm Support film cylinder diameter: 390mm Film thickness: 5,5mm Basic requirements: Power: 380V Langston: 93KVA (460V and 110V for controls) Compressed air: 5,6bars, Q= 80 m3/hr running, 170 m3/hr during setting Water: T= 43°C, P= 2,5bars |