LAEM SYSTEM DOCTORING MACHINE VIS100-800 Rolenschneider // Slitter rewinders // Converting machines // Gebrauchte Maschinen // Tecno Converting 2000 S.r.l.

Maschinencode: SR559
Hersteller: LAEM SYSTEM
Modello: DOCTORING MACHINE VIS100-800
Baujahr: 2015
Working width (mm): 800
Materials: APET/PE materials .Thickness range to be considered is 50 – 600 µm
Speed: 600m/min
Max diameter reel unwinder: 800
Rewinder type: Center driven with independent arms
Max diameter reel rewinder: 1000
Note: The VIS Machine is designed to correct alignment errors and to remove defective spans from finished reels of APET sheet. The machine is bidirectional, allowing the web to run through the machine in either direction: during first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with help of splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. Splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. Unwind & Rewind Tension range:25-250 N Maximum outer diameter unwinding/rewinding:1000 mm Taper Tension:From 100% to 50% of the set tension Web direction:Bidirectional Electric power supply, drive:CA 400V – 50HZ Electronic power supply, service voltage:12 kW Electronic components:Siemens Min. Pressure of compressed air supply:6 bar Consumption of compressed air, humidity free:70 l/hr Noise level Lp(A):< 80 Db(A) Rewinding parametres : Maximum jumbo roll width:800 mm Width of rollers / draw roller:900 mm Maximum jumbo roll diameter:1000 mm Unwinding and Rewinding Shafts:Two 3” + two 6” shafts Maximum jumbo roll weight:800 kg Type of cores:Good quality cardboard Web guide stroke :± 50 mm Rewinding method :Central drive, with rubberized lay-on roller across the full nominal width

Maschinencode	SR559
Hersteller	LAEM SYSTEM
Modello	DOCTORING MACHINE VIS100-800
Baujahr	2015
Working width (mm)	800
Materials	APET/PE materials .Thickness range to be considered is 50 – 600 µm
Speed	600m/min
Max diameter reel unwinder	800
Rewinder type	Center driven with independent arms
Max diameter reel rewinder	1000
Note	The VIS Machine is designed to correct alignment errors and to remove defective spans from finished reels of APET sheet. The machine is bidirectional, allowing the web to run through the machine in either direction: during first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with help of splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. Splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. Unwind & Rewind Tension range:25-250 N Maximum outer diameter unwinding/rewinding:1000 mm Taper Tension:From 100% to 50% of the set tension Web direction:Bidirectional Electric power supply, drive:CA 400V – 50HZ Electronic power supply, service voltage:12 kW Electronic components:Siemens Min. Pressure of compressed air supply:6 bar Consumption of compressed air, humidity free:70 l/hr Noise level Lp(A):< 80 Db(A) Rewinding parametres : Maximum jumbo roll width:800 mm Width of rollers / draw roller:900 mm Maximum jumbo roll diameter:1000 mm Unwinding and Rewinding Shafts:Two 3” + two 6” shafts Maximum jumbo roll weight:800 kg Type of cores:Good quality cardboard Web guide stroke :± 50 mm Rewinding method :Central drive, with rubberized lay-on roller across the full nominal width