- Maschinencode
- BO59
- Hersteller
- BRUCKNER
- Baujahr
- 1996
- Number of layers
- 3
- Film structure
- Film width 6300 mm on winder
- Material
- BOPP
- Output
- 2060 Kg/h
- Width (mm)
- 6300
- Extruder 1 Description
- output 105 kg/hr each; L/D 32:1, 100 rpm.
- Extruder 2 Description
- Cascade main extruder, 290 rpm; L/D: 21, 510kw DC.
- Extruder 3 Description
- output 105 kg/hr each; L/D 32:1, 100 rpm.
- Die width
- 833
- Chill roll unit
- Chill roll, Air knife, film and chill roll drying system, water bath.
- MDO description
- 10 pre-heating rolls-oil heating; 6 stretching rolls-circulating oil; 2 annealing rolls-electrical heaters; 5 nip rolls; stretching ratio 1:1 - 1:7; Aux, winder.
- TDO description
- Chain and chain track system F.O.K 4.4.2; Heating system: circulating air via individual heating system/zone (oil heating, motors, fans, sensor, etc); edge guide system at inlet.
- Corona treatment
- 2 corona treatment stations (up and down - Double tretaed)
- Pull roll unit
- Cromed Rolls chilled by water; Edge trim on-line recycling unit; Thickness Gauge Pm 147.
- Rewinder width
- 7000
- Note
- Max mechanical speed: 250 m/min / upgraded to 300 m/min; AC and PLC:-fully integrated system PLC with 3 operator workstations with trends and reports; Utilities:- Compressor, Boiler, Silos, Mill Rolls, Mill roll Stands (corona and nip), Nip Rolls stands, Over Head Crane (10TM).
Maschinencode | BO59 |
Hersteller | BRUCKNER |
Baujahr | 1996 |
Number of layers | 3 |
Film structure | Film width 6300 mm on winder |
Material | BOPP |
Output | 2060 Kg/h |
Width (mm) | 6300 |
Extruder 1 Description | output 105 kg/hr each; L/D 32:1, 100 rpm. |
Extruder 2 Description | Cascade main extruder, 290 rpm; L/D: 21, 510kw DC. |
Extruder 3 Description | output 105 kg/hr each; L/D 32:1, 100 rpm. |
Die width | 833 |
Chill roll unit | Chill roll, Air knife, film and chill roll drying system, water bath. |
MDO description | 10 pre-heating rolls-oil heating; 6 stretching rolls-circulating oil; 2 annealing rolls-electrical heaters; 5 nip rolls; stretching ratio 1:1 - 1:7; Aux, winder. |
TDO description | Chain and chain track system F.O.K 4.4.2; Heating system: circulating air via individual heating system/zone (oil heating, motors, fans, sensor, etc); edge guide system at inlet. |
Corona treatment | 2 corona treatment stations (up and down - Double tretaed) |
Pull roll unit | Cromed Rolls chilled by water; Edge trim on-line recycling unit; Thickness Gauge Pm 147. |
Rewinder width | 7000 |
Note | Max mechanical speed: 250 m/min / upgraded to 300 m/min; AC and PLC:-fully integrated system PLC with 3 operator workstations with trends and reports; Utilities:- Compressor, Boiler, Silos, Mill Rolls, Mill roll Stands (corona and nip), Nip Rolls stands, Over Head Crane (10TM). |
DMT BOPP
-
Maschinencode: BO67
-
Baujahr: 1997
-
Width (mm): 6500
BRUCKNER
-
Maschinencode: BO81
-
Baujahr: 1992
-
Width (mm): 8200
BRUCKNER
-
Maschinencode: BO57
-
Baujahr: 1990
-
Width (mm): 7400
BRUCKNER - CELLIER
-
Maschinencode: BO82
-
Baujahr: 1991
-
Width (mm): 8200
MITSUBISHI
-
Maschinencode: BO74
-
Baujahr: 1980
-
Width (mm): 5500