- Code Machine
- LA246
- Fabricant
- ROTOMEC
- Modello
- Coater and laminator
- Année
- 1990
- Application
- Triplex lamination
- Type of lamination/coating
- SOLVENT / WATER BASED
- Overhaul/renovation
- New drives ControlTechnique and electric renovation
- Working width (mm)
- 1450
- Materials
- Plastic film; Alu foil and paper up to 120gsm
- Speed
- 300 mt/min
- First unwinder type
- Turret
- Max diameter reel unwinder
- 800
- Secondary unwinder type
- Turret
- Max diameter reel unwinder
- 800
- Third unwinder type
- Single for Alu foil
- Max diameter reel unwinder
- 800
- Rewinder type
- Turret automatic center surface by Cerruti new 2010
- Max diameter reel rewinder
- 1000
- Coating unit
- Gravure type
- Second Coating unitr
- Gravure type
- Drying
- Diathermic oil-2 sections - first tunnel 4 mt after coating unit, second tunnel 12 mt after second coating unit
- Corona treatment
- 2 corona treaters
- Note
- Operation possibilities: -double coating front side -double coating font and back side -lamination and coating on front or back side -triplex lamination CERUTTI turret rewinder center surface new 2010
Code Machine | LA246 |
Fabricant | ROTOMEC |
Modello | Coater and laminator |
Année | 1990 |
Application | Triplex lamination |
Type of lamination/coating | SOLVENT / WATER BASED |
Overhaul/renovation | New drives ControlTechnique and electric renovation |
Working width (mm) | 1450 |
Materials | Plastic film; Alu foil and paper up to 120gsm |
Speed | 300 mt/min |
First unwinder type | Turret |
Max diameter reel unwinder | 800 |
Secondary unwinder type | Turret |
Max diameter reel unwinder | 800 |
Third unwinder type | Single for Alu foil |
Max diameter reel unwinder | 800 |
Rewinder type | Turret automatic center surface by Cerruti new 2010 |
Max diameter reel rewinder | 1000 |
Coating unit | Gravure type |
Second Coating unitr | Gravure type |
Drying | Diathermic oil-2 sections - first tunnel 4 mt after coating unit, second tunnel 12 mt after second coating unit |
Corona treatment | 2 corona treaters |
Note | Operation possibilities: -double coating front side -double coating font and back side -lamination and coating on front or back side -triplex lamination CERUTTI turret rewinder center surface new 2010 |
CML MIRACH
-
Code Machine: LA350
-
Année: 2006
-
Working width (mm): 1220
NORDMECCANICA SUPERSIMPLEX
-
Code Machine: LA304
-
Année: 1996
-
Working width (mm): 1400
NORDMECCANICA TRIPLEX COMBI
-
Code Machine: LA388
-
Année: 1998
-
Working width (mm): 1400
CML MIRACH
-
Code Machine: LA453
-
Année: 2008
-
Working width (mm): 1300
CML MIRACH
-
Code Machine: LA361
-
Année: 2001
-
Working width (mm): 1250
ITALFLEX 2000-80
-
Code Machine: LA391
-
Année: 2001
-
Working width (mm): 900