3 couches BRUCKNER Machine de extrusion de film BOPP / BOPET // BOPP BOPET // Film extrusion lines // Équipement d'occasion // Tecno Converting 2000 S.r.l.

** SOLD **

Photo Gallerie

Code Machine: BO59
Fabricant: BRUCKNER
Année: 1996
Number of layers: 3
Film structure: Film width 6300 mm on winder
Material: BOPP
Output: 2060 Kg/h
Width (mm): 6300
Extruder 1 Description: output 105 kg/hr each; L/D 32:1, 100 rpm.
Extruder 2 Description: Cascade main extruder, 290 rpm; L/D: 21, 510kw DC.
Extruder 3 Description: output 105 kg/hr each; L/D 32:1, 100 rpm.
Die width: 833
Chill roll unit: Chill roll, Air knife, film and chill roll drying system, water bath.
MDO description: 10 pre-heating rolls-oil heating; 6 stretching rolls-circulating oil; 2 annealing rolls-electrical heaters; 5 nip rolls; stretching ratio 1:1 - 1:7; Aux, winder.
TDO description: Chain and chain track system F.O.K 4.4.2; Heating system: circulating air via individual heating system/zone (oil heating, motors, fans, sensor, etc); edge guide system at inlet.
Corona treatment: 2 corona treatment stations (up and down - Double tretaed)
Pull roll unit: Cromed Rolls chilled by water; Edge trim on-line recycling unit; Thickness Gauge Pm 147.
Rewinder width: 7000
Note: Max mechanical speed: 250 m/min / upgraded to 300 m/min; AC and PLC:-fully integrated system PLC with 3 operator workstations with trends and reports; Utilities:- Compressor, Boiler, Silos, Mill Rolls, Mill roll Stands (corona and nip), Nip Rolls stands, Over Head Crane (10TM).

Code Machine	BO59
Fabricant	BRUCKNER
Année	1996
Number of layers	3
Film structure	Film width 6300 mm on winder
Material	BOPP
Output	2060 Kg/h
Width (mm)	6300
Extruder 1 Description	output 105 kg/hr each; L/D 32:1, 100 rpm.
Extruder 2 Description	Cascade main extruder, 290 rpm; L/D: 21, 510kw DC.
Extruder 3 Description	output 105 kg/hr each; L/D 32:1, 100 rpm.
Die width	833
Chill roll unit	Chill roll, Air knife, film and chill roll drying system, water bath.
MDO description	10 pre-heating rolls-oil heating; 6 stretching rolls-circulating oil; 2 annealing rolls-electrical heaters; 5 nip rolls; stretching ratio 1:1 - 1:7; Aux, winder.
TDO description	Chain and chain track system F.O.K 4.4.2; Heating system: circulating air via individual heating system/zone (oil heating, motors, fans, sensor, etc); edge guide system at inlet.
Corona treatment	2 corona treatment stations (up and down - Double tretaed)
Pull roll unit	Cromed Rolls chilled by water; Edge trim on-line recycling unit; Thickness Gauge Pm 147.
Rewinder width	7000
Note	Max mechanical speed: 250 m/min / upgraded to 300 m/min; AC and PLC:-fully integrated system PLC with 3 operator workstations with trends and reports; Utilities:- Compressor, Boiler, Silos, Mill Rolls, Mill roll Stands (corona and nip), Nip Rolls stands, Over Head Crane (10TM).