- Code Machine
- LA044
- Fabricant
- KROENERT
- Modello
- RECO 2TD
- Année
- 1982
- Application
- Coating
- Type of lamination/coating
- SOLVENT / WATER BASED
- Working width (mm)
- 1600
- Speed
- 300m/min max; 250m/min running
- First unwinder type
- Turret - fly splice
- Max diameter reel unwinder
- 1000
- Rewinder type
- Turret - fly splice
- Max diameter reel rewinder
- 1200
- Coating unit
- 2 coating heads. twin direct gravure .Steam dryer ; Energy source:boiler;3 drying zones,6 top; Drive system: Lenze; Power requirements:100amp,380volt,50hz; Space required:20x5; 2nd coating head :7 drying chambers ; fly/splice unwind; speed 180m/min; 2 chill roller stack; Twin direct/reverse gravure coater;The coater has 4 tension control zones with pneumatic dancer rollers. This enables substrates of as low as 30gsm to be handle on this line. This coater is very well maintained. Analogue DC drive system
- Drying
- drying steam, 2 coating heads,1st direct gravure, solvent capability with fullextraction, 3 drying chambers,
- Note
- Solvent capability with full extraction; Antistatic throughout machine; Capable of applying 1-2 gsm dry silicon release coating at speed. Direct or reverse gravure.3 drying chambers;1 chill roller . Unwinder : tension control ; Wichita system; Edge guide rewinder :FIFE;
Code Machine | LA044 |
Fabricant | KROENERT |
Modello | RECO 2TD |
Année | 1982 |
Application | Coating |
Type of lamination/coating | SOLVENT / WATER BASED |
Working width (mm) | 1600 |
Speed | 300m/min max; 250m/min running |
First unwinder type | Turret - fly splice |
Max diameter reel unwinder | 1000 |
Rewinder type | Turret - fly splice |
Max diameter reel rewinder | 1200 |
Coating unit | 2 coating heads. twin direct gravure .Steam dryer ; Energy source:boiler;3 drying zones,6 top; Drive system: Lenze; Power requirements:100amp,380volt,50hz; Space required:20x5; 2nd coating head :7 drying chambers ; fly/splice unwind; speed 180m/min; 2 chill roller stack; Twin direct/reverse gravure coater;The coater has 4 tension control zones with pneumatic dancer rollers. This enables substrates of as low as 30gsm to be handle on this line. This coater is very well maintained. Analogue DC drive system |
Drying | drying steam, 2 coating heads,1st direct gravure, solvent capability with fullextraction, 3 drying chambers, |
Note | Solvent capability with full extraction; Antistatic throughout machine; Capable of applying 1-2 gsm dry silicon release coating at speed. Direct or reverse gravure.3 drying chambers;1 chill roller . Unwinder : tension control ; Wichita system; Edge guide rewinder :FIFE; |
COMEXI L20000
-
Code Machine: LA376
-
Année: 2018
-
Working width (mm): 920
NORDMECCANICA
-
Code Machine: LA280
-
Année: 1998
-
Working width (mm): 1220
CML MIRACH
-
Code Machine: LA361
-
Année: 2001
-
Working width (mm): 1250
NORDMECCANICA SUPERSIMPLEX
-
Code Machine: LA304
-
Année: 1996
-
Working width (mm): 1400
DCM
-
Code Machine: LA428
-
Année: 2008
-
Working width (mm): 680
Bubani Adhesive tape solvent base
-
Code Machine: LA312
-
Année: 1990
-
Working width (mm): 1350