- Código Máquina
- EC37
- Constructor
- DOLCI EXTRUSION
- Año
- 2011
- Overhaul/renovation
- Machine has very little use and good maintenance. conditions near to new
- Width (mm)
- 1100
- Coating/lamination units
- 3
- Coating/lamination unit 1 description
- 2x gravimetric dosing units 2 components make Innoplast; Extruder diam 130 mm hydraulic screen changer AC motor; Extruder diam 90 mm hydraulic screen changer AC moto; flat extrusion die make Cloren with internal deckling system to deduce width down to 600mm width, automatic die via flex lip and thermal bolts (48+4 thermobolts); Chill roll diam 1000mm, chrome plated, semi mat finish, edge trimming with Aertecnica Croci edge suction and compact device
- Coating/lamination unit 2 description
- Lamination unit; 3x gravimetric dosing units 2 components make Innoplast; 1x Extruder diam120 mm hydraulic screen changer AC motor; 2x Extruder diam 75 mm hydraulic screen changer AC moto; flat extrusion die make Cloren with internal deckling system to deduce width down to 600mm width, automatic die via flex lip and thermal bolts (48+4 thermobolts); Chill roll diam 1000mm, chrome plated, semi mat finish, edge trimming with Aertecnica Croci edge suction and compact device; lamination device; turret alu foil secondary unwinder
- Coating/lamination unit 3 description
- 2x gravimetric dosing units 2 components make Innoplast; Extruder diam 130 mm hydraulic screen changer AC motor; Extruder diam 90 mm hydraulic screen changer AC moto; flat extrusion die make Cloren with internal deckling system to deduce width down to 600mm width, automatic die via flex lip and thermal bolts (48+4 thermobolts); Chill roll diam 1000mm, chrome plated, semi mat finish, edge trimming with Aertecnica Croci edge suction and compact device
- Treatment
- 1 x double side corona treatment MERO; 1x double single corona treatment MERO; 1x Flame treatment ESSECI gas fired, chill roll diam 350mm, water termo regulation unit
- Primary unwinder description
- automatic shaftless with reel loading from floor type BUTT-splice max diam 1500mm
- Secondary unwinder description
- turret automatic diam 800mm
- Rewinder description
- turret automatic shaftless max diam 1800mm
- Speed
- 600m/min mechanical
- Product structure / Materials
- line for aseptic packaging. Board up to 400 gsm, Alluminium foil 6,5-20my. Polymers, LDPE, LLDPE, EAA, EMA,Surlin, Yonomers
- Note
- - Automatic thickness control system: 3 thickness gauges make NDC. 2x x-rays, 1x both x-rays and infra-red. 3 extrusion dies with automatic thickness control - Chilled water pumping system for the whole line (in closed loop) - Water chiller - 3 units aertecnica croci for edge trim suction and compression - Siemens S7 PLC, ABB inverters - Overhead bridge cranes
Código Máquina | EC37 |
Constructor | DOLCI EXTRUSION |
Año | 2011 |
Overhaul/renovation | Machine has very little use and good maintenance. conditions near to new |
Width (mm) | 1100 |
Coating/lamination units | 3 |
Coating/lamination unit 1 description | 2x gravimetric dosing units 2 components make Innoplast; Extruder diam 130 mm hydraulic screen changer AC motor; Extruder diam 90 mm hydraulic screen changer AC moto; flat extrusion die make Cloren with internal deckling system to deduce width down to 600mm width, automatic die via flex lip and thermal bolts (48+4 thermobolts); Chill roll diam 1000mm, chrome plated, semi mat finish, edge trimming with Aertecnica Croci edge suction and compact device |
Coating/lamination unit 2 description | Lamination unit; 3x gravimetric dosing units 2 components make Innoplast; 1x Extruder diam120 mm hydraulic screen changer AC motor; 2x Extruder diam 75 mm hydraulic screen changer AC moto; flat extrusion die make Cloren with internal deckling system to deduce width down to 600mm width, automatic die via flex lip and thermal bolts (48+4 thermobolts); Chill roll diam 1000mm, chrome plated, semi mat finish, edge trimming with Aertecnica Croci edge suction and compact device; lamination device; turret alu foil secondary unwinder |
Coating/lamination unit 3 description | 2x gravimetric dosing units 2 components make Innoplast; Extruder diam 130 mm hydraulic screen changer AC motor; Extruder diam 90 mm hydraulic screen changer AC moto; flat extrusion die make Cloren with internal deckling system to deduce width down to 600mm width, automatic die via flex lip and thermal bolts (48+4 thermobolts); Chill roll diam 1000mm, chrome plated, semi mat finish, edge trimming with Aertecnica Croci edge suction and compact device |
Treatment | 1 x double side corona treatment MERO; 1x double single corona treatment MERO; 1x Flame treatment ESSECI gas fired, chill roll diam 350mm, water termo regulation unit |
Primary unwinder description | automatic shaftless with reel loading from floor type BUTT-splice max diam 1500mm |
Secondary unwinder description | turret automatic diam 800mm |
Rewinder description | turret automatic shaftless max diam 1800mm |
Speed | 600m/min mechanical |
Product structure / Materials | line for aseptic packaging. Board up to 400 gsm, Alluminium foil 6,5-20my. Polymers, LDPE, LLDPE, EAA, EMA,Surlin, Yonomers |
Note | - Automatic thickness control system: 3 thickness gauges make NDC. 2x x-rays, 1x both x-rays and infra-red. 3 extrusion dies with automatic thickness control - Chilled water pumping system for the whole line (in closed loop) - Water chiller - 3 units aertecnica croci for edge trim suction and compression - Siemens S7 PLC, ABB inverters - Overhead bridge cranes |
BLACK CLAWSON
-
Código Máquina: EC49
-
Año: 1980
-
Width (mm): 2500
SML - STARLINGER
-
Código Máquina: EC40
-
Año: 2000
-
Width (mm): 1550
HAN YOUNG Extrusion lamination
-
Código Máquina: EC32
-
Año: 2005
-
Width (mm): 2200
KUHNE/ SML
-
Código Máquina: EC48
-
Año: 2006
-
Width (mm): 1180
HAN YOUNG extrusion lamination
-
Código Máquina: EC31
-
Año: 2001
-
Width (mm): 1500
S.A.M.
-
Código Máquina: EC45
-
Año: 2011
-
Width (mm): 1450