- Maschinencode
- LA246
- Hersteller
- ROTOMEC
- Modello
- Coater and laminator
- Baujahr
- 1990
- Application
- Triplex lamination
- Type of lamination/coating
- SOLVENT / WATER BASED
- Overhaul/renovation
- New drives ControlTechnique and electric renovation
- Working width (mm)
- 1450
- Materials
- Plastic film; Alu foil and paper up to 120gsm
- Speed
- 300 mt/min
- First unwinder type
- Turret
- Max diameter reel unwinder
- 800
- Secondary unwinder type
- Turret
- Max diameter reel unwinder
- 800
- Third unwinder type
- Single for Alu foil
- Max diameter reel unwinder
- 800
- Rewinder type
- Turret automatic center surface by Cerruti new 2010
- Max diameter reel rewinder
- 1000
- Coating unit
- Gravure type
- Second Coating unitr
- Gravure type
- Drying
- Diathermic oil-2 sections - first tunnel 4 mt after coating unit, second tunnel 12 mt after second coating unit
- Corona treatment
- 2 corona treaters
- Note
- Operation possibilities: -double coating front side -double coating font and back side -lamination and coating on front or back side -triplex lamination CERUTTI turret rewinder center surface new 2010
| Maschinencode | LA246 |
| Hersteller | ROTOMEC |
| Modello | Coater and laminator |
| Baujahr | 1990 |
| Application | Triplex lamination |
| Type of lamination/coating | SOLVENT / WATER BASED |
| Overhaul/renovation | New drives ControlTechnique and electric renovation |
| Working width (mm) | 1450 |
| Materials | Plastic film; Alu foil and paper up to 120gsm |
| Speed | 300 mt/min |
| First unwinder type | Turret |
| Max diameter reel unwinder | 800 |
| Secondary unwinder type | Turret |
| Max diameter reel unwinder | 800 |
| Third unwinder type | Single for Alu foil |
| Max diameter reel unwinder | 800 |
| Rewinder type | Turret automatic center surface by Cerruti new 2010 |
| Max diameter reel rewinder | 1000 |
| Coating unit | Gravure type |
| Second Coating unitr | Gravure type |
| Drying | Diathermic oil-2 sections - first tunnel 4 mt after coating unit, second tunnel 12 mt after second coating unit |
| Corona treatment | 2 corona treaters |
| Note | Operation possibilities: -double coating front side -double coating font and back side -lamination and coating on front or back side -triplex lamination CERUTTI turret rewinder center surface new 2010 |
NORDMECCANICA Super Combi 3000
-
Maschinencode: LA531
-
Baujahr: 2012
-
Working width (mm): 1330
DCM Laminastar 2
-
Maschinencode: LA306
-
Baujahr: 2000
-
Working width (mm): 1300
SCHIAVI BOBST CL600
-
Maschinencode: LA455
-
Baujahr: 2007
-
Working width (mm): 1300
SCHIAVI CONCORDE
-
Maschinencode: LA354
-
Baujahr: 1994
-
Working width (mm): 1220
ROTOMEC duplex
-
Maschinencode: LA426
-
Baujahr: 1980
-
Working width (mm): 800
KBA FLEXOTECNICA
-
Maschinencode: LA492
-
Baujahr: 2020
-
Working width (mm): 1300