S.A.M. Accoppiatore / spalmatrice SOLVENT / WATER BASED

Codice Macchina
LA427
Manufacturer
S.A.M.
Year
2017
Applicazione
Lamination + coating
Tipo di accoppiamento/spalmatura
SOLVENT / WATER BASED
Larghezza lavoro (mm)
1250
Materiali
Film, Paper , AL foil from 12 microns
Tipo svolgitore primario
Turret automatic
Diametro massimo bobina svolgitore
1000
Tipo svolgitore secondario
Turret automatic
Diametro massimo bobina svolgitore
1000
Rewinder type
Turret automatic
Diametro massimo bobina avvolgitore
1000
Unità di spalmatura
Gravure coating unit sleeves type with trolley
Seconda unità di spalmatura
Gravure coating unit with gravure trolley and Semiflexo trolley Trolleys are interchangeable with station 1
Essiccazione
1st coating unit - 2 zone drying section - total air inlet 7000 Nmc/h 1 vertical dryer 1,8 m Max T°C 120 and following 1 Horizontal Dryer 3 meter - Max T 150 °C Total installed power 300.000 Kcal /h 2nd coating unit 4 zones Drying section - Total air inlet 18.000 Nmc/h - 1 vertical dryer 3.0 m Max T°C 120 and following 3 horizontal dryers of 3 meters each Max T °C 150 - 200 - 150 Total installed power 800.000 Kcl/h
Ulteriori informazioni
Automatic LEL control for driers , Automatic Viscosity control , Chillers , CO2 fire extinguisher complete on the machine , Full ventilation system with thermal oil heat exchangers , Antistatic bars
Codice Macchina LA427
Manufacturer S.A.M.
Year 2017
Applicazione Lamination + coating
Tipo di accoppiamento/spalmatura SOLVENT / WATER BASED
Larghezza lavoro (mm) 1250
Materiali Film, Paper , AL foil from 12 microns
Tipo svolgitore primario Turret automatic
Diametro massimo bobina svolgitore 1000
Tipo svolgitore secondario Turret automatic
Diametro massimo bobina svolgitore 1000
Rewinder type Turret automatic
Diametro massimo bobina avvolgitore 1000
Unità di spalmatura Gravure coating unit sleeves type with trolley
Seconda unità di spalmatura Gravure coating unit with gravure trolley and Semiflexo trolley Trolleys are interchangeable with station 1
Essiccazione 1st coating unit - 2 zone drying section - total air inlet 7000 Nmc/h 1 vertical dryer 1,8 m Max T°C 120 and following 1 Horizontal Dryer 3 meter - Max T 150 °C Total installed power 300.000 Kcal /h 2nd coating unit 4 zones Drying section - Total air inlet 18.000 Nmc/h - 1 vertical dryer 3.0 m Max T°C 120 and following 3 horizontal dryers of 3 meters each Max T °C 150 - 200 - 150 Total installed power 800.000 Kcl/h
Ulteriori informazioni Automatic LEL control for driers , Automatic Viscosity control , Chillers , CO2 fire extinguisher complete on the machine , Full ventilation system with thermal oil heat exchangers , Antistatic bars
BIELLONI CLEO BIELLOFLEX
NORDMECCANICA SUPER SIMPLEX
CML MIRACH
NORDMECCANICA TRIPLEX SL ONE SHOT
NORDMECCANICA
CML MIRACH