- Codice Macchina
- CA279
- Manufacturer
- COLINES
- Modello
- ALLROLL EX 1500
- Year
- 2020
- Numero di strati
- 5
- Struttura film
- A-C-B-C-D
- Materiali
- Stretch film LLDPE
- Larghezza film (mm)
- 1500
- Velocità (m/m)
- 500 MPM
- Rif strati estrusore 1:
- A
- Screw diam 1
- 55mm L/D 34
- Description 1
- Infrared heating ,Hydraulic manual screen changer , gravimetric dosers Doteco 4 comp
- Rif strati estrusore 2:
- B
- Screw diam 2
- 80mm L/D 34
- Description 2
- Infrared heating , Hydraulic manual screen changer , Gravimetric dosers Doteco 4 comp
- Rif strati estrusore 3:
- C
- Screw diam 3
- 120 mm L/D 30
- Description 3
- Infrared heating , Hydraulic manual screen changer , Gravimetric dosers Doteco 4 comp
- Rif strati estrusore 4:
- D
- Screw diam 4
- 55mm L/D 34
- Description 4
- Infrared heating , Hydraulic manual screen changer , Gravimetric dosers Doteco 4 comp
- Descrizione testa
- CLOEREN/USA fixed geometry 5-layer feed-block for A-C-B-C-D structure. The feedblock is designed for the coextrusion of multi-layer melt laminate structures. Dual chamber vacuum box complete with piping and N.2 fans. Electrostatic edge pinning device.
- Die width (mm)
- 2100 mm
- Unità chill roll
- Chill-roll unit with a roller diam. 1400 mm and a detachment cooled roller diam. 300 mm, complete with a.c. motor drives, rotating joints and rubber-coated cleaning roller
- Controllo di spessore
- NDC – USA IR thickness gaugecontrol system, complete with support structureforthe assemblingin line,videounit, codifying unit of the product and autodiagnosis unit.Measurement and Control Station (MCS) .AUTO PROFILE CONTROL (APC) System
- Descrizione avvolgitore
- Side-slip unit (Oscillating frame) . Haul-off unit composed of a pair of motorized rollers controlled by inverter. Automatic winders ALLSPEEDY® IV – 3-shaft Turret with 3 shafts, 25 sec cycle time. Available with 2 inch shafts for hand reels and 3 inch for machine and jumbo reels. Diameter of finished reels with 2” air-shafts 80- 150 mm Diameter of finished reels with 3” air-shafts 420 mm
- Ulteriori informazioni
- Thickness min.-max of film 8 - 35 micron Max gross capacity 1350 Kg/h RECYCLING N.2 BIGMOUTH® units: recycling device for trimmed edges, equipped with a milling unit and conveying system of the fluff to the re-feeding system applied upon the extrude diam. 120 mm –
| Codice Macchina | CA279 |
| Manufacturer | COLINES |
| Modello | ALLROLL EX 1500 |
| Year | 2020 |
| Numero di strati | 5 |
| Struttura film | A-C-B-C-D |
| Materiali | Stretch film LLDPE |
| Larghezza film (mm) | 1500 |
| Velocità (m/m) | 500 MPM |
| Rif strati estrusore 1: | A |
| Screw diam 1 | 55mm L/D 34 |
| Description 1 | Infrared heating ,Hydraulic manual screen changer , gravimetric dosers Doteco 4 comp |
| Rif strati estrusore 2: | B |
| Screw diam 2 | 80mm L/D 34 |
| Description 2 | Infrared heating , Hydraulic manual screen changer , Gravimetric dosers Doteco 4 comp |
| Rif strati estrusore 3: | C |
| Screw diam 3 | 120 mm L/D 30 |
| Description 3 | Infrared heating , Hydraulic manual screen changer , Gravimetric dosers Doteco 4 comp |
| Rif strati estrusore 4: | D |
| Screw diam 4 | 55mm L/D 34 |
| Description 4 | Infrared heating , Hydraulic manual screen changer , Gravimetric dosers Doteco 4 comp |
| Descrizione testa | CLOEREN/USA fixed geometry 5-layer feed-block for A-C-B-C-D structure. The feedblock is designed for the coextrusion of multi-layer melt laminate structures. Dual chamber vacuum box complete with piping and N.2 fans. Electrostatic edge pinning device. |
| Die width (mm) | 2100 mm |
| Unità chill roll | Chill-roll unit with a roller diam. 1400 mm and a detachment cooled roller diam. 300 mm, complete with a.c. motor drives, rotating joints and rubber-coated cleaning roller |
| Controllo di spessore | NDC – USA IR thickness gaugecontrol system, complete with support structureforthe assemblingin line,videounit, codifying unit of the product and autodiagnosis unit.Measurement and Control Station (MCS) .AUTO PROFILE CONTROL (APC) System |
| Descrizione avvolgitore | Side-slip unit (Oscillating frame) . Haul-off unit composed of a pair of motorized rollers controlled by inverter. Automatic winders ALLSPEEDY® IV – 3-shaft Turret with 3 shafts, 25 sec cycle time. Available with 2 inch shafts for hand reels and 3 inch for machine and jumbo reels. Diameter of finished reels with 2” air-shafts 80- 150 mm Diameter of finished reels with 3” air-shafts 420 mm |
| Ulteriori informazioni | Thickness min.-max of film 8 - 35 micron Max gross capacity 1350 Kg/h RECYCLING N.2 BIGMOUTH® units: recycling device for trimmed edges, equipped with a milling unit and conveying system of the fluff to the re-feeding system applied upon the extrude diam. 120 mm – |
BETOL
-
Codice Macchina: CA247
-
Year: 1994
-
Larghezza film (mm): 650
SML CAST COEX 5
-
Codice Macchina: CA277
-
Year: 2005
-
Larghezza film (mm): 2500
ADTECH PROVERA
-
Codice Macchina: CA205
-
Year: 2003
-
Larghezza film (mm): 1500
COLINES ALL ROLL EX 1500
-
Codice Macchina: CA215
-
Year: 2017
-
Larghezza film (mm): 1500
TECNICOL
-
Codice Macchina: CA267
-
Year: 2000
-
Larghezza film (mm): 2000
SML Cast Ellm Monoaxial stretch
-
Codice Macchina: CA276
-
Year: 1999
-
Larghezza film (mm): 1850