- Codice Macchina
- CA182
- Manufacturer
- COLINES
- Modello
- Air bubble line
- Year
- 1992
- Numero di strati
- 3
- Struttura film
- 25/50/25 %
- Materiali
- Air bubble film
- Larghezza film (mm)
- 2500
- Rif strati estrusore 1:
- 100mm LD28mm
- Screw diam 1
- 100
- Description 1
- with granule feeding hopper. 3 Lever type screen changers for extruders diam.100 mm
- Rif strati estrusore 2:
- 100mm LD28mm
- Rif strati estrusore 3:
- 100mm LD28mm
- Die width (mm)
- 2800
- Descrizione avvolgitore
- 3-shaft automatic winding unit complete with edge trim cutting, haul-off calender, cylinders
- Ulteriori informazioni
- N.1 2-position unwinding group for third layer unit complete with disk braking with safety casing N.1 2-position unwinding group for fourth layer unit complete with disk braking with safety casing N.1 Bubble forming calender with cast cylinder and 2 preheating cylinders, vacuum suction pump with forming cylinder diam. 10x4 mm N.1 Chill roll unit with 2 cylinders diam 600 mm and 350 mm N.1 Air blade group N.1 Edge trim recovery system with suction heads, fan with ejector and sound proofing, sound proof mill with suction from grid, air-trim separation cyclone, motorised re-feeding extruder. • Power supply 380V 3-phase 50 Hz+N+G • Installed total power 760 Kw • Required water hardness 20°F • Compressed air quality dry • Compressed air pressure 8 bar
Codice Macchina | CA182 |
Manufacturer | COLINES |
Modello | Air bubble line |
Year | 1992 |
Numero di strati | 3 |
Struttura film | 25/50/25 % |
Materiali | Air bubble film |
Larghezza film (mm) | 2500 |
Rif strati estrusore 1: | 100mm LD28mm |
Screw diam 1 | 100 |
Description 1 | with granule feeding hopper. 3 Lever type screen changers for extruders diam.100 mm |
Rif strati estrusore 2: | 100mm LD28mm |
Rif strati estrusore 3: | 100mm LD28mm |
Die width (mm) | 2800 |
Descrizione avvolgitore | 3-shaft automatic winding unit complete with edge trim cutting, haul-off calender, cylinders |
Ulteriori informazioni | N.1 2-position unwinding group for third layer unit complete with disk braking with safety casing N.1 2-position unwinding group for fourth layer unit complete with disk braking with safety casing N.1 Bubble forming calender with cast cylinder and 2 preheating cylinders, vacuum suction pump with forming cylinder diam. 10x4 mm N.1 Chill roll unit with 2 cylinders diam 600 mm and 350 mm N.1 Air blade group N.1 Edge trim recovery system with suction heads, fan with ejector and sound proofing, sound proof mill with suction from grid, air-trim separation cyclone, motorised re-feeding extruder. • Power supply 380V 3-phase 50 Hz+N+G • Installed total power 760 Kw • Required water hardness 20°F • Compressed air quality dry • Compressed air pressure 8 bar |
TECHNO COATING ENGINEERING
-
Codice Macchina: CA230
-
Year: 2001
-
Larghezza film (mm): 2000
WINDMÖLLER & HÖLSCHER FILMEX
-
Codice Macchina: CA133
-
Year: 1999
-
Larghezza film (mm): 1760
SML
-
Codice Macchina: CA236
-
Year: 1997
-
Larghezza film (mm): 2000
DOLCI
-
Codice Macchina: CA194
-
Year: 2011
-
Larghezza film (mm): 2000
BATTENFELD GLOUCESTER
-
Codice Macchina: CA195
-
Year: 2000
-
Larghezza film (mm): 2250
WINDMÖLLER & HÖLSCHER FILMEX
-
Codice Macchina: CA174
-
Year: 2008
-
Larghezza film (mm): 2100