WATERLINE Ritebag 600 пакетоформирующие машины / вакуумный мешок

Machine code
PO54
Manufacturer
WATERLINE
Modello
Ritebag 600
Year
2013
Type of sealing/bags
Stand up pouches
Bag length
MAX: 650mm (610mm stand up) on 1 lane. 320mm (305mm stand-up) on 2 lanes MINIMUM:80mm
Bag width
MAX: 800mm MIN: 80mm
Unwinder
Single, max reel width 1530mm, reel diam 1016mm 3 and 6 inch shafts, 2 trimming blades, edge guide, tension control, Punching station in register for guesset hole, main folding triagle for prodiction of 3 side seal from 1 web; Gusset foling bord for production of stand up from 1 web
Cycle / min
125
Additional information type of bags
2 and 3 side sela pouches and stand-up pouches (gusset depth 20-100mm)
Note
Machine is servo driven, with several independent servo drives for max flexibility and to optimize change over time - Longitudinal zipper sealing, 2 lanes - 2 xLongitudinal sealing (800+100mm) and cooling (400+100mm)¨ - 2x cross sealing sections 680mm - handle hole punching - V and U corners punching - Register photocell - MD trimming - Cross cutting section, flying knife (1 or 2 lanes)
Machine code PO54
Manufacturer WATERLINE
Modello Ritebag 600
Year 2013
Type of sealing/bags Stand up pouches
Bag length MAX: 650mm (610mm stand up) on 1 lane. 320mm (305mm stand-up) on 2 lanes MINIMUM:80mm
Bag width MAX: 800mm MIN: 80mm
Unwinder Single, max reel width 1530mm, reel diam 1016mm 3 and 6 inch shafts, 2 trimming blades, edge guide, tension control, Punching station in register for guesset hole, main folding triagle for prodiction of 3 side seal from 1 web; Gusset foling bord for production of stand up from 1 web
Cycle / min 125
Additional information type of bags 2 and 3 side sela pouches and stand-up pouches (gusset depth 20-100mm)
Note Machine is servo driven, with several independent servo drives for max flexibility and to optimize change over time - Longitudinal zipper sealing, 2 lanes - 2 xLongitudinal sealing (800+100mm) and cooling (400+100mm)¨ - 2x cross sealing sections 680mm - handle hole punching - V and U corners punching - Register photocell - MD trimming - Cross cutting section, flying knife (1 or 2 lanes)