- Machine code
- BO97
- Manufacturer
- MITSUBISHI
- Year
- 2004
- Number of layers
- 5
- Film structure
- ABCDE
- Material
- BOPP
- Output
- max output 4400 kg/h, max speed 400 m/min, Extruder's output 5900 kg/h
- Width (mm)
- 8300
- Extruder 1 Description
- Layerr C: Main extruder, MHI, cascade extrusion, - melting screw 250mm, L/D 17, 4 zones heating 100kW, water cooling, Drive motor 2x 600 kW AC vvvv - metering screw 300mm, L/D 20, 6 zones heating 216kW, water cooling, Drive motor 600 kW AC vvvv Capacity 4400 kg/h
- Extruder 2 Description
- Layer A: Single screw extruder for skin layer, capacity 250 kg/h, screw diameter 90mm, L/D33, screw speed 14-140 rpm, motor 90kW AC vvvf, 7 zones heating, total 45 kW
- Extruder 3 Description
- Layer B:Single screw extruder for skin layer, capacity 500 kg/h, screw diameter 135mm, L/D33, screw speed 18-180 rpm, motor 200kW AC vvvf, 8 zones heating, total 88 kW
- Extruder 4 Description
- Layer D:Single screw extruder for skin layer, capacity 500 kg/h, screw diameter 135mm, L/D33, screw speed 18-180 rpm, motor 200kW AC vvvf, 8 zones heating, total 88 kW
- Extruder 5 Description
- Layers E:: Single screw extruder for skin layer, capacity 250 kg/h, screw diameter 90mm, L/D33, screw speed 14-140 rpm, motor 90kW AC vvvf, 7 zones heating, total 45 kW
- Head description
- Tide, automatic thickness profile control via flexible lip with push-pull bolts actuated bx APC system,
- Die width
- 1200mm, gap 2.9-4.3mm
- Thickness controll system
- Automatic thickness profile control. 2 thickness gauge with Beta rays system. First gauge Sources 90 sr and second gauge 147 pm
- Chill roll unit
- Chill roller in water bath: - cooling roll Jacketed type double wall, diameter 2600mm, roll width 1500mm, - tear roll, driven 200 mm diameter, guide roll 200mm diameter, take up roll driven 300 mm diameter, rubber surface nip roller diameter 200 mm - speed 10-100m/min - Air Knife width 1026-1200mm, 20m3/h - AC motor vvvf control - Water pumping and termo regulation system - Film throughput 4400 kg/h
- MDO description
- - Stretching ratio: from 1:1 up to 1:7; - slow section 10-100mpm, after stretching40-400mpm; - Preheating 9 temperature zones, Medium speed stretching 2 temperature zones, High speed stretching 2 temperature zones - 18 pre heating rolls 600mm diameter, 4 stretching rolls 180mm diameter, 4 annealing rolls 500 mm diameter, 14 nip rollers - Threading device - Detector will breakage - Scrap winder - ac motors driven with vvvf control - low speed zone steam heated, medium speed and high speed area pressurised hot water heating,
- TDO description
- Stretching ratio: from 1:7 up to 1:10 - Inlet 900-1300mm width, outlet 7800-8600mm - Bearing type chain with 6 bearings - Preheating zone 1-7 - Stretching zones 8-13 - Heat set zones 14-18 - Neutral zone - Cooling zone - Max tem in preheating 195C - 57 m length heated part + 6m cooling section
- Corona treatment
- Softal
- Rewinder width
- max will wide 8700mm, turret type. Cores 504mmx8700mm
- Rewinder description
- reel diameter 1200mm
- Slitter
- Primary slitter make Atlas included. Driven unwind, Rewinder with center driven independent couple of arms. Motor position of arms
- Note
- Total length approx 120m
| Machine code | BO97 |
| Manufacturer | MITSUBISHI |
| Year | 2004 |
| Number of layers | 5 |
| Film structure | ABCDE |
| Material | BOPP |
| Output | max output 4400 kg/h, max speed 400 m/min, Extruder's output 5900 kg/h |
| Width (mm) | 8300 |
| Extruder 1 Description | Layerr C: Main extruder, MHI, cascade extrusion, - melting screw 250mm, L/D 17, 4 zones heating 100kW, water cooling, Drive motor 2x 600 kW AC vvvv - metering screw 300mm, L/D 20, 6 zones heating 216kW, water cooling, Drive motor 600 kW AC vvvv Capacity 4400 kg/h |
| Extruder 2 Description | Layer A: Single screw extruder for skin layer, capacity 250 kg/h, screw diameter 90mm, L/D33, screw speed 14-140 rpm, motor 90kW AC vvvf, 7 zones heating, total 45 kW |
| Extruder 3 Description | Layer B:Single screw extruder for skin layer, capacity 500 kg/h, screw diameter 135mm, L/D33, screw speed 18-180 rpm, motor 200kW AC vvvf, 8 zones heating, total 88 kW |
| Extruder 4 Description | Layer D:Single screw extruder for skin layer, capacity 500 kg/h, screw diameter 135mm, L/D33, screw speed 18-180 rpm, motor 200kW AC vvvf, 8 zones heating, total 88 kW |
| Extruder 5 Description | Layers E:: Single screw extruder for skin layer, capacity 250 kg/h, screw diameter 90mm, L/D33, screw speed 14-140 rpm, motor 90kW AC vvvf, 7 zones heating, total 45 kW |
| Head description | Tide, automatic thickness profile control via flexible lip with push-pull bolts actuated bx APC system, |
| Die width | 1200mm, gap 2.9-4.3mm |
| Thickness controll system | Automatic thickness profile control. 2 thickness gauge with Beta rays system. First gauge Sources 90 sr and second gauge 147 pm |
| Chill roll unit | Chill roller in water bath: - cooling roll Jacketed type double wall, diameter 2600mm, roll width 1500mm, - tear roll, driven 200 mm diameter, guide roll 200mm diameter, take up roll driven 300 mm diameter, rubber surface nip roller diameter 200 mm - speed 10-100m/min - Air Knife width 1026-1200mm, 20m3/h - AC motor vvvf control - Water pumping and termo regulation system - Film throughput 4400 kg/h |
| MDO description | - Stretching ratio: from 1:1 up to 1:7; - slow section 10-100mpm, after stretching40-400mpm; - Preheating 9 temperature zones, Medium speed stretching 2 temperature zones, High speed stretching 2 temperature zones - 18 pre heating rolls 600mm diameter, 4 stretching rolls 180mm diameter, 4 annealing rolls 500 mm diameter, 14 nip rollers - Threading device - Detector will breakage - Scrap winder - ac motors driven with vvvf control - low speed zone steam heated, medium speed and high speed area pressurised hot water heating, |
| TDO description | Stretching ratio: from 1:7 up to 1:10 - Inlet 900-1300mm width, outlet 7800-8600mm - Bearing type chain with 6 bearings - Preheating zone 1-7 - Stretching zones 8-13 - Heat set zones 14-18 - Neutral zone - Cooling zone - Max tem in preheating 195C - 57 m length heated part + 6m cooling section |
| Corona treatment | Softal |
| Rewinder width | max will wide 8700mm, turret type. Cores 504mmx8700mm |
| Rewinder description | reel diameter 1200mm |
| Slitter | Primary slitter make Atlas included. Driven unwind, Rewinder with center driven independent couple of arms. Motor position of arms |
| Note | Total length approx 120m |
DMT BOPP
-
Machine code: BO67
-
Year: 1997
-
Width (mm): 6500
DORNIER
-
Machine code: BO104
-
Year: 1998
-
Width (mm): 6350
BRUCKNER
-
Machine code: BO90
-
Year: 2014
-
Width (mm): 8300
BRUCKNER BOPP
-
Machine code: BO60
-
Year: 1993
-
Width (mm): 6600
BRUCKNER
-
Machine code: BO66
-
Year: 2021
-
Width (mm): 4200