- Machine code
- BO98
- Manufacturer
- BRUCKNER
- Year
- 2012
- Number of layers
- 3
- Film structure
- ABC
- Material
- BOPP and Syntethic Paper
- Output
- max output 5000 kg/h. Output on 20my 4000kg/h. Max speed 460 m/min
- Width (mm)
- 8200
- Extruder 1 Description
- Main extruder layer C: - type twin co-rotating screw, model ZE155/32D - Barrel diam 169mm L/D32 - Speed nominal 300 rpm - Output 5700 kg/h - Gravimetric blender 4 components, mixing hopper - Drive AC motor 1500 kW - 6 heating zones, 289 kW, Water cooled - Melt pump 179 kW ac motor - Filter: Long life candle type with 48 candles
- Extruder 2 Description
- Coex 1 - type single screw, Kiefel Kirio 120/33D - output 380 kg/h - Screw diameter 120mm L/D33 - 5 zones heating 79 kW - AC motor 179kW - Filter: Long life candle type with 4 candles , Gravimetric blender 4 components, mixing hopper
- Extruder 3 Description
- Coex 2 - type single screw, Kiefel Kirio 105/33D - output 290 kg/h - Screw diameter 105mm L/D33 - 5 zones heating 70 kW - AC motor 135kW - Filter: double screen changer , Gravimetric blender 4 components, mixing hopper
- Head description
- T Extrusion die with automatic thickness control via quick acting Push/pull boltscontinuous closed loop temperature control of bolt heaters by advanced solid state relais,
- Die width
- 1140mm, gap 1,7-3,5mm
- Thickness controll system
- Automatic thickness profile control, Thickness gauge via beta rays, source: Promethium 147
- Chill roll unit
- Chill roll in water bath -Chill roller dial 2800mm, working width 1200mm, face width 1400mm - AC direct drive of rolls - cooling 625 kW throughput chill roll 320 m3/h water - cooling 1.000 kW throughput water bath 200 m3/h water - Nip roller torque controlled - Air knife with edge pipes - take off and guide rolls - Wired removal from roller and film - Driven nip roll
- MDO description
- - Stretching ratio: 1 : 1 - 1 : 7 - Direct drive with independent motors in electronic line shaft, Multipole synchronous permanent magnet torque motor - 20 pre heating roll, each with independent motor drive - 6 stretching roll, each with independent motor drive - 4 annealing roll, each with independent motor drive - Pre heating rollers diam 614mm, 4 chrome plated, 6 teflon plated - Stretching rollers 150mm diameter, Chrome plated, Nip rollers 150mm diameter Rubber covered - Annealing rollers 614mm diam 4 Chrome plated , 2 Rubber covered - Web threading system - Film Breacker detector
- TDO description
- Stretching ratio: 1:8-1:10 Sections: - Pre heating: 27m in 6 sections of 4,5m each - Stretching: 15m in5 sections of 3m each - Annealing 18m in 6 sections of 3m each - Neutral section - Cooling section7,5m in 5 sections of 1,5m each - Edge cooling - Exit 1,5m Chain and track system FOK 4.4.6 - Type sliding chain with lubrification - Pitch 60mm - Clip width 114mm - Magnetic opening and closing system Edge Tracker7 Inlet Drive by AC regenerative motors Heat source: Therma oil
- Corona treatment
- 1 Corona for Bottom Treatment, , 1 x Corona for Top side treatment modular designed solid state generators in stand-alone units with digital IGBT Frequency : approx. 25 kHz Process roll: steel core with dielectric rubber covering
- Rewinder description
- - Face width width 8600mm, - Working width: 6.500 - 8.200 mm - Max reel diam 1450mm with core 655 and 1350mm with core 550mm - Turret type - Contact roll with LI-Wind system
- Note
- Edge trim and re-feeding system: - automatic pulling, cutting and conveying, independent from line speed and thickness of film - Grinder capacity 1200kg(h - pneumatic flake conveying system Feeding: Granulate silos 2 x 80 m2, degranulate silos 1x 80 m3, Conveying system,
| Machine code | BO98 |
| Manufacturer | BRUCKNER |
| Year | 2012 |
| Number of layers | 3 |
| Film structure | ABC |
| Material | BOPP and Syntethic Paper |
| Output | max output 5000 kg/h. Output on 20my 4000kg/h. Max speed 460 m/min |
| Width (mm) | 8200 |
| Extruder 1 Description | Main extruder layer C: - type twin co-rotating screw, model ZE155/32D - Barrel diam 169mm L/D32 - Speed nominal 300 rpm - Output 5700 kg/h - Gravimetric blender 4 components, mixing hopper - Drive AC motor 1500 kW - 6 heating zones, 289 kW, Water cooled - Melt pump 179 kW ac motor - Filter: Long life candle type with 48 candles |
| Extruder 2 Description | Coex 1 - type single screw, Kiefel Kirio 120/33D - output 380 kg/h - Screw diameter 120mm L/D33 - 5 zones heating 79 kW - AC motor 179kW - Filter: Long life candle type with 4 candles , Gravimetric blender 4 components, mixing hopper |
| Extruder 3 Description | Coex 2 - type single screw, Kiefel Kirio 105/33D - output 290 kg/h - Screw diameter 105mm L/D33 - 5 zones heating 70 kW - AC motor 135kW - Filter: double screen changer , Gravimetric blender 4 components, mixing hopper |
| Head description | T Extrusion die with automatic thickness control via quick acting Push/pull boltscontinuous closed loop temperature control of bolt heaters by advanced solid state relais, |
| Die width | 1140mm, gap 1,7-3,5mm |
| Thickness controll system | Automatic thickness profile control, Thickness gauge via beta rays, source: Promethium 147 |
| Chill roll unit | Chill roll in water bath -Chill roller dial 2800mm, working width 1200mm, face width 1400mm - AC direct drive of rolls - cooling 625 kW throughput chill roll 320 m3/h water - cooling 1.000 kW throughput water bath 200 m3/h water - Nip roller torque controlled - Air knife with edge pipes - take off and guide rolls - Wired removal from roller and film - Driven nip roll |
| MDO description | - Stretching ratio: 1 : 1 - 1 : 7 - Direct drive with independent motors in electronic line shaft, Multipole synchronous permanent magnet torque motor - 20 pre heating roll, each with independent motor drive - 6 stretching roll, each with independent motor drive - 4 annealing roll, each with independent motor drive - Pre heating rollers diam 614mm, 4 chrome plated, 6 teflon plated - Stretching rollers 150mm diameter, Chrome plated, Nip rollers 150mm diameter Rubber covered - Annealing rollers 614mm diam 4 Chrome plated , 2 Rubber covered - Web threading system - Film Breacker detector |
| TDO description | Stretching ratio: 1:8-1:10 Sections: - Pre heating: 27m in 6 sections of 4,5m each - Stretching: 15m in5 sections of 3m each - Annealing 18m in 6 sections of 3m each - Neutral section - Cooling section7,5m in 5 sections of 1,5m each - Edge cooling - Exit 1,5m Chain and track system FOK 4.4.6 - Type sliding chain with lubrification - Pitch 60mm - Clip width 114mm - Magnetic opening and closing system Edge Tracker7 Inlet Drive by AC regenerative motors Heat source: Therma oil |
| Corona treatment | 1 Corona for Bottom Treatment, , 1 x Corona for Top side treatment modular designed solid state generators in stand-alone units with digital IGBT Frequency : approx. 25 kHz Process roll: steel core with dielectric rubber covering |
| Rewinder description | - Face width width 8600mm, - Working width: 6.500 - 8.200 mm - Max reel diam 1450mm with core 655 and 1350mm with core 550mm - Turret type - Contact roll with LI-Wind system |
| Note | Edge trim and re-feeding system: - automatic pulling, cutting and conveying, independent from line speed and thickness of film - Grinder capacity 1200kg(h - pneumatic flake conveying system Feeding: Granulate silos 2 x 80 m2, degranulate silos 1x 80 m3, Conveying system, |
MITSUBISHI
-
Machine code: BO97
-
Year: 2004
-
Width (mm): 8300
DMT BOPP
-
Machine code: BO67
-
Year: 1997
-
Width (mm): 6500
BRUCKNER BOPP
-
Machine code: BO60
-
Year: 1993
-
Width (mm): 6600
MITSUBISHI
-
Machine code: BO74
-
Year: 1980
-
Width (mm): 5500
BRUCKNER
-
Machine code: BO89
-
Year: 2009
-
Width (mm): 8300
DMT TDO unit for PVC shrink labels
-
Machine code: BO68
-
Year: 2004
-
Width (mm): 2500