GHEZZI & ANNONI HOTMELT Ламинаторы Hot melt

Machine code
LA302
Manufacturer
GHEZZI & ANNONI
Modello
HOTMELT
Year
2002
Application
Coating
Type of lamination/coating
Hot melt
Working width (mm)
1650
Materials
BOPP, Celofan, Masking tape, Polythene Strapping, Reinforced
Speed
Mechanical speed : 350 m/min Machine running speed: 300 m/min (18g/m2 adhesive)
First unwinder type
Jumbo
Max diameter reel unwinder
1000
Rewinder type
Jumbo
Max diameter reel rewinder
1000
Coating unit
1 by Mayer bar
Second Coating unitr
2 extruders
Drying
Thermic oil - Electric for die
Note
Winder was replaced in 2007 with a newer one scrapless. Automatic duplex Unwinder auto splice Release Unit completed with TRESU closed Dr Blade Adhesive coating die ( Simplas ) Adhesive preparation Unit Automatic duplex Rewinder auto splice LEL System + LEL Alert Hotmelt Adhesive filter : mahle system Edge guide unit : 1-before coating die 1-before rewinder Hotmelt adhesive: 12g/m2 – 120 g/m2 Temperature: Between 100-200°C Adhesive : Mixed with SIS rubber and SBS Viscosity: Between 10,000 – 100,000 CPS Release Drying Tunnels; 1 Oven with a total heating power 350.000Kcal/h Total Air flow: 18,000m3/h Max working temperature: 120°C Entrance temperature: 20°C Air absorption capacity: 14,000Nm3/h approx.
Machine code LA302
Manufacturer GHEZZI & ANNONI
Modello HOTMELT
Year 2002
Application Coating
Type of lamination/coating Hot melt
Working width (mm) 1650
Materials BOPP, Celofan, Masking tape, Polythene Strapping, Reinforced
Speed Mechanical speed : 350 m/min Machine running speed: 300 m/min (18g/m2 adhesive)
First unwinder type Jumbo
Max diameter reel unwinder 1000
Rewinder type Jumbo
Max diameter reel rewinder 1000
Coating unit 1 by Mayer bar
Second Coating unitr 2 extruders
Drying Thermic oil - Electric for die
Note Winder was replaced in 2007 with a newer one scrapless. Automatic duplex Unwinder auto splice Release Unit completed with TRESU closed Dr Blade Adhesive coating die ( Simplas ) Adhesive preparation Unit Automatic duplex Rewinder auto splice LEL System + LEL Alert Hotmelt Adhesive filter : mahle system Edge guide unit : 1-before coating die 1-before rewinder Hotmelt adhesive: 12g/m2 – 120 g/m2 Temperature: Between 100-200°C Adhesive : Mixed with SIS rubber and SBS Viscosity: Between 10,000 – 100,000 CPS Release Drying Tunnels; 1 Oven with a total heating power 350.000Kcal/h Total Air flow: 18,000m3/h Max working temperature: 120°C Entrance temperature: 20°C Air absorption capacity: 14,000Nm3/h approx.
** SOLD **
NORDMECCANICA TRIPLEX SL ONE SHOT
CERUTTI SPIRITO SL1400
CML MIRACH
NORDMECCANICA DUPLEX
WINDMÖLLER & HÖLSCHER
S.A.M.