- Codice Macchina
- LA301
- Manufacturer
- COSMOPLASTICS
- Year
- 1997
- Applicazione
- Coating
- Tipo di accoppiamento/spalmatura
- SOLVENT / WATER BASED
- Rinnovo
- 2006 electric/electronic parts fully rebuilt, some mechanic too.
- Larghezza lavoro (mm)
- 1300
- Materiali
- Protection tape (solvent + water based ) + packing tape + masking tape+ double-sided tape
- Velocità
- Mechanic 200 m/min Production 40-110 m/min
- Tipo svolgitore primario
- Turret flying splice
- Diametro massimo bobina svolgitore
- 800
- Tipo svolgitore secondario
- Simplex single shaft for lamination
- Diametro massimo bobina svolgitore
- 800
- Rewinder type
- Turret flying splice
- Diametro massimo bobina avvolgitore
- 800
- Unità di spalmatura
- Mayer bar
- Seconda unità di spalmatura
- Roll over roll
- Essiccazione
- Thermic oil . Oven length: 16m
- Pre-fusore colla
- 1 reservoir
- Trattamento Corona
- Martignoni
- Ulteriori informazioni
- 2 coating units with trolley One station with mayer bar – one station roll over roll. Total length 22 m Before adhesive applying unit there is a calendar unit. After drying oven chill roll All cylinders are plasma coated where is necessary.
Codice Macchina | LA301 |
Manufacturer | COSMOPLASTICS |
Year | 1997 |
Applicazione | Coating |
Tipo di accoppiamento/spalmatura | SOLVENT / WATER BASED |
Rinnovo | 2006 electric/electronic parts fully rebuilt, some mechanic too. |
Larghezza lavoro (mm) | 1300 |
Materiali | Protection tape (solvent + water based ) + packing tape + masking tape+ double-sided tape |
Velocità | Mechanic 200 m/min Production 40-110 m/min |
Tipo svolgitore primario | Turret flying splice |
Diametro massimo bobina svolgitore | 800 |
Tipo svolgitore secondario | Simplex single shaft for lamination |
Diametro massimo bobina svolgitore | 800 |
Rewinder type | Turret flying splice |
Diametro massimo bobina avvolgitore | 800 |
Unità di spalmatura | Mayer bar |
Seconda unità di spalmatura | Roll over roll |
Essiccazione | Thermic oil . Oven length: 16m |
Pre-fusore colla | 1 reservoir |
Trattamento Corona | Martignoni |
Ulteriori informazioni | 2 coating units with trolley One station with mayer bar – one station roll over roll. Total length 22 m Before adhesive applying unit there is a calendar unit. After drying oven chill roll All cylinders are plasma coated where is necessary. |
NORDMECCANICA DUPLEX SL 450
-
Codice Macchina: LA429
-
Year: 2017
-
Larghezza lavoro (mm): 1100
NORDMECCANICA TRIPLEX COMBI
-
Codice Macchina: LA175
-
Year: 2006
-
Larghezza lavoro (mm): 1300
ROTOMEC duplex
-
Codice Macchina: LA426
-
Year: 1980
-
Larghezza lavoro (mm): 800
CML MIRACH
-
Codice Macchina: LA457
-
Year: 2006
-
Larghezza lavoro (mm): 1200
Bubani Adhesive tape solvent base
-
Codice Macchina: LA312
-
Year: 1990
-
Larghezza lavoro (mm): 1350
SCHIAVI ECOFLEX
-
Codice Macchina: LA378
-
Year: 2000
-
Larghezza lavoro (mm): 1420