CMR DUAL SUPER COMPACT SL/SB/HM Accoppiatore / spalmatrice SOLVENT BASED, SOLVENTLESS , HOTMELT ** VENDUTA ** Richiedi Maggiori Informazioni su una simile

Codice Macchina LA275
Costruttore CMR
Modello DUAL SUPER COMPACT SL/SB/HM
Anno 2011
Applicazione Lamination + coating
Tipo di accoppiamento/spalmatura SOLVENT BASED, SOLVENTLESS , HOTMELT
Larghezza lavoro (mm) 1000
Materiali Primary unwinder ;POLYESTER: 10- 12 my ,OPP/BOPP: 15- 25 my,MET. POLYESTER: 12 -25 my,LDPE – HDPE – LLDPE : 40- 60 my,PETP : 9- 30 my,OP: 12- 18 my,NYLON CAST: 30- 80 my,PP CAST:60-150 my,PAPER :40-150 g/m2,ALU: 6,25 - 40 my, Secondary unwinder:BOPP :12- 80 my,PP CAST: 20-150 my ,ALU :7- 40 my,LDPE – LLDPE: 20- 200 my,NYLON CAST:20- 80 my,POLYESTER :10- 20 my,PETP :9- 30 my,OPA :12- 18 my,PAPER:40-150 g/m2 ,
Velocità Production speed: Solventless : 250 mts/min, Solvent base: 200 m/min, Hot melt: 100 m/min
Diametro massimo bobina svolgitore 800
Diametro massimo bobina svolgitore 800
Diametro massimo bobina avvolgitore 1000
Unità di spalmatura Coating via rotogravure trolley and hot melt trolley .Coating Group (5 cylinders type) with interchangeable coating units ( NR. 1 cylinder COATING .NR. 1 cylinder CARRIER (sleeves type) NR. 1 cylinder METERING NR. 1 cylinder METERING NR. 1 cylinder PRESSURE
Esiccazione Electric
Trattamento Corona CASON
Ulteriori informazioni Suitable for Solvent Less - Solvent Base and Hot Melt processes Primary unwinder: Max. Reel Diameter: 800 mm Inner core diameter: 76 – 152 mm Secundary unwinder: Max. Reel Diameter: 800 mm Inner core diameter 76 – 152 mm Rewinder: Max. reel diameter: 1000 mm Inner core diameter: 76- 152 mm TENSION RANGE : Unwinder: 3-30 Kg Rewinder: 5-50 Kg Coating group solventless configuration composed by 5 cylinders drive by AC Vectorial motors Coating grup solvent- rotogravure coating concept composed by 1 cylinder coating (anylox roll) 1 cylinder PRESSURE ROLLER (sleeves type) on trolley WAX COATING DEVICE , mainly composed by : Nr. 1 COLLECTING TANK with double chamber HEATED BY THERMIC OIL RECIRCULATION UPTO A MAX. 170° constantly kept Nr. 1 TANK with double gradient t facilitate the complete discharge FEEDING system of the tank on two ( 2 ) sides to make even the WAX distribution. Nr. 1 METERING rubber coated back cylinder Nr. 1 AC MOTOR to drive the metering back cylinder , with possibility to change the speed from 10% to 50% according to the material’s range Nr. 1 PNEUMATIC system to approach to the rubber coated cyclinder, with pneumatic pistons and pressure regulators ON REMOVABLE TROLLEY Edge guide BST type Installed on the secondary unwinder

** VENDUTA **


Ti potrebbero interessare anche:

203741 - VEA ENTRY 1300

VEA ENTRY 1300

Categoria: Converting machines

Sottocategoria: Laminators and coaters

Larghezza lavoro (mm): 1300

Anno: 2002

194899 - NORDMECCANICA HORIZONTAL

NORDMECCANICA HORIZONTAL

Categoria: Converting machines

Sottocategoria: Laminators and coaters

Larghezza lavoro (mm): 1500

Anno: 2012

202935 - GHEZZI & ANNONI HOTMELT

GHEZZI & ANNONI HOTMELT

Categoria: Converting machines

Sottocategoria: Laminators and coaters

Larghezza lavoro (mm): 1650

Anno: 2002

2982 - SCHIAVI  CONVERJET

SCHIAVI CONVERJET

Categoria: Converting machines

Sottocategoria: Laminators and coaters

Larghezza lavoro (mm): 1220

Anno: 1998

Utilizzando il nostro sito web acconsenti all'uso di cookies.

Informazioni OK