- Codice Macchina
- RO150
- Manufacturer
- DCM
- Modello
- ATENA
- Year
- 2007
- Numero di colori
- 7
- Trolley system
- Yes
- Larghezza nastro (mm)
- 660
- Larghezza stampa (mm)
- 640
- Formato stampa (mm)
- 360-760 mm
- Drying specifications
- The low temperature high efficiency dryer insure an air circulation and heating. The circulating air in the dryer has a velocity of 40 m/s with an adjustable fan and blower 7000 m3/hour and heated by thermo-oil installation and with temperature regulation. Very precisely controlled air recirculation allows an efficient dryer at a low temperature, saving thus energy and substrate quality
- Drying heat surce
- thermo-oil instalation
- Unwinder type
- Automatic
- Diametro massimo svolgitore (mm)
- 1800
- Rewinder type
- Single Shaft
- Max reel diameter rewinder (mm)
- 1300
- Videocamera
- BST Handyscan
- Controllo di registro
- DGC 650 from Eltromat
- Vyscosity control
- Viscosity control equipment with solvent reservoir enables to measure and adjust viscosity of solvent inks (Opticolor Junior)
- Cilindri stampa
- 67 printing cylinders (13 steel base only and 54 copper covered) ;3 sets of cutting + creasing tools
- Ulteriori informazioni
- SUBSTRATE: PAPER/CARDBOARD SUBSTRATE WEIGHT: 60-300 gsm MAXIMUM ROTARY DIE CUTTING WIDTH : 660 mm MAXIMUM ROTARY DIE CUTTING REPEAT : 800 mm MINIMUM ROTARY DIE CUTTING REPEAT : 535 mm Production of cigaretes packaging, paper labels and cardboard packaging Register control DGC 650 from Eltromat Splicing device AIR VOLUME : 7000 m3/h AIR VELOCITY : 40 m/s REGISTER ACCURACY PRINT TO PRINT : +/- 0.10 mm PRINT TO CUT : +/- 0.15 mm ELECTRICAL SPECIFICATIONS : 400 V, 3 phases, 50 Hz PRODUCTION SPEED : up to 200 m/min 3 stage rotary die cutting unit RDC10 in-line - embossing, creasing and cutting/stripping cassettes Production: roll to roll, roll to sheet, roll to die-cut product Additional equipment included in price – 67 printing cylinders (13 steel base only and 54 copper covered) – 3 sets of cutting + creasing tools (buyer can’t use the whole tool, only original ATN cassettes in which the tools are packed)
Codice Macchina | RO150 |
Manufacturer | DCM |
Modello | ATENA |
Year | 2007 |
Numero di colori | 7 |
Trolley system | Yes |
Larghezza nastro (mm) | 660 |
Larghezza stampa (mm) | 640 |
Formato stampa (mm) | 360-760 mm |
Drying specifications | The low temperature high efficiency dryer insure an air circulation and heating. The circulating air in the dryer has a velocity of 40 m/s with an adjustable fan and blower 7000 m3/hour and heated by thermo-oil installation and with temperature regulation. Very precisely controlled air recirculation allows an efficient dryer at a low temperature, saving thus energy and substrate quality |
Drying heat surce | thermo-oil instalation |
Unwinder type | Automatic |
Diametro massimo svolgitore (mm) | 1800 |
Rewinder type | Single Shaft |
Max reel diameter rewinder (mm) | 1300 |
Videocamera | BST Handyscan |
Controllo di registro | DGC 650 from Eltromat |
Vyscosity control | Viscosity control equipment with solvent reservoir enables to measure and adjust viscosity of solvent inks (Opticolor Junior) |
Cilindri stampa | 67 printing cylinders (13 steel base only and 54 copper covered) ;3 sets of cutting + creasing tools |
Ulteriori informazioni | SUBSTRATE: PAPER/CARDBOARD SUBSTRATE WEIGHT: 60-300 gsm MAXIMUM ROTARY DIE CUTTING WIDTH : 660 mm MAXIMUM ROTARY DIE CUTTING REPEAT : 800 mm MINIMUM ROTARY DIE CUTTING REPEAT : 535 mm Production of cigaretes packaging, paper labels and cardboard packaging Register control DGC 650 from Eltromat Splicing device AIR VOLUME : 7000 m3/h AIR VELOCITY : 40 m/s REGISTER ACCURACY PRINT TO PRINT : +/- 0.10 mm PRINT TO CUT : +/- 0.15 mm ELECTRICAL SPECIFICATIONS : 400 V, 3 phases, 50 Hz PRODUCTION SPEED : up to 200 m/min 3 stage rotary die cutting unit RDC10 in-line - embossing, creasing and cutting/stripping cassettes Production: roll to roll, roll to sheet, roll to die-cut product Additional equipment included in price – 67 printing cylinders (13 steel base only and 54 copper covered) – 3 sets of cutting + creasing tools (buyer can’t use the whole tool, only original ATN cassettes in which the tools are packed) |
CERUTTI PB510 - ES 960
-
Codice Macchina: RO238
-
Year: 2000
-
Larghezza nastro (mm): 1420
CERUTTI R 940
-
Codice Macchina: RO175
-
Year: 1997
-
Larghezza nastro (mm): 1350
ACOM RG EXCEL
-
Codice Macchina: RO255
-
Year: 2014
-
Larghezza nastro (mm): 850
SCHIAVI PULSAR
-
Codice Macchina: RO243
-
Larghezza nastro (mm): 1450
ROTOMEC 3003-R-ES
-
Codice Macchina: RO234
-
Year: 2000
-
Larghezza nastro (mm): 1030
ROTOMEC 3001
-
Codice Macchina: RO209
-
Year: 1995
-
Larghezza nastro (mm): 1400