Código Máquina	LA044
Constructor	KROENERT
Modelo	RECO 2TD
Año	1982
Aplicación	Coating
Tipo de recubrimiento / acoplamiento	Any water based or solvent based coating 10gsm wet with 50 solid content
Ancho de trabajo (mm)	1600
Velocidad	300m/min max; 250m/min running
Tipo primer desenrollador	Turret - fly splice
Diametro max bobina desenrollador	1000
Tipo Enrollador	Turret - fly splice
Diametro max bobina enrollador	1200
Unidad de recubrimiento	2 coating heads. twin direct gravure .Steam dryer ; Energy source:boiler;3 drying zones,6 top; Drive system: Lenze; Power requirements:100amp,380volt,50hz; Space required:20x5; 2nd coating head :7 drying chambers ; fly/splice unwind; speed 180m/min; 2 chill roller stack; Twin direct/reverse gravure coater;The coater has 4 tension control zones with pneumatic dancer rollers. This enables substrates of as low as 30gsm to be handle on this line. This coater is very well maintained. Analogue DC drive system
Sistema de secado	drying steam, 2 coating heads,1st direct gravure, solvent capability with fullextraction, 3 drying chambers,
Informaciones adicionales	Solvent capability with full extraction; Antistatic throughout machine; Capable of applying 1-2 gsm dry silicon release coating at speed. Direct or reverse gravure.3 drying chambers;1 chill roller . Unwinder : tension control ; Wichita system; Edge guide rewinder :FIFE;

KROENERT RECO 2TD Laminadora Any water based or solvent based coating 10gsm wet with 50 solid content ** VENDIDA ** Informaciones adicionales sobre una similar

** VENDIDA **