ANDREOTTI ROTOSTAR 35 Maquina de grabado 8 colores
| Código Máquina | RO111 |
| Constructor | ANDREOTTI |
| Modelo | ROTOSTAR 35 |
| Año | 1989 |
| Número de colores | 8 |
| Trolley system | Yes |
| Ancho del material (mm) | 1130 |
| Desarollo de impresión | 400-1000 mm |
| Drying heat surce | Gas complete with 2 gas burners Imeco |
| Diámetro máximo bobinas Desenrollador (mm) | 800 |
| Tipo Enrollador | Automatic |
| Max reel diameter rewinder (mm) | 800 |
| Videocámera | Fife |
| Control de registro | Grafikontrol CR7 |
| Vyscosity control | 8 Viscometers model COVISTAT/F “GRAFIKONTROL” |
| Cilindros de impresión | 800 cylinders |
| Informaciones adicionales | Suitable to print the following materials:non extensible films, paper, thin cardboard, different laminated materials with max grammage 200 gr/sqm, raw aluminum starting from 15 micron, high density polyethylene starting from 25 micron,polypropylene starting from 15 micron, polyester starting from 12 micron, cellophane from 28 to 30 gr/sqm,flexible PVC. Complete with sleeves.Max mechanical speed 750rpm; Inks, lacquers and solvents; Electric power supply 380 V/50 HZ ; services power supply 110 V/50 HZ; installed electric power Kw 330 approx; absorbed electric power Kw 190 approx ; Automatic unwinding mod. “B.O./1400”, pre-conditioner of the band;chilled rolls positioned after pre-conditioner; Band feeding group with constant tension (infeeder) mod. “GTR/1400”, placed on inlet of first printing element; No. 8 printing elements mod “PRINTOMATIC NR 35/S 1400”, anti-explosion, used in the printing zone under CEI rules, suitable for reversed print; Band feeding group with constant tension (outfeeder) mod. “GTR/1400”, placed on exit of last printing element; No. 1 tunnel with ventilation on two sides length 3 m special type (for low tension supports), for final deodorizing of the support; air capacity 10.000 m3/; max temperature 120°C; No. 2 chilled rolls placed before the re-winding phase;Arrangement for the application of stroboscope ;No. 1 rewinder mod.”BO/1400”, which allows the automatic reels changing at the machine production speed) ; Supporting structure; D.C. motor and drive with controlled diodes with incorporated switchboard to control the plant; Electric cabinets for auxiliary services; No. 2 fixed ladders and footboard. No. 1 platform in which all LED, switches and push-buttons for main machine drive are placed; No. 3 trolleys to carry printing cylinders and pressure rolls;Stroboscope FIFE HLD 500 (with rotating mirrors);Anti-explosion device |
Otros en la misma categoría:
