LEMO Intermat Bag making machine Soft loop handles

** SOLD **

Film bag making machines are used to weld a web or a tubular of plastic film, typically PE or PP, into bags. Their construction and equipment may be very different depending on: the type of bags they need to produce, the type of handle they can apply and the way in which these bags are delivered.

Ask more informations
about a similar one
Machine Code
FI427
Manufacturer
LEMO
Modello
Intermat
Year
1996
Type of delivery
Conveyor table
Type of handle
Soft loop handle
Type of sealing/bags
Side weld
Type of bags
Soft loop handles
Working width (mm)
750
Bag length
300 to 750 mm.
Cycle / min
120
Unwinder
Unwinding 1 meter in diameter.Widths: 400-1600 mm.
Note
Servomotors drive Collector table with automatic counter. Type of main welding 40-80 microns in LDPE. Available presolder for thicknesses greater than 50 microns. Double contact welding with cutting blade. Loop loop 350 mm width of coil. 150-200 microns thick. Two lower and upper welding heads. Control of time and temperature. Seal shape: semicircular or elliptical. Triangle bending Semi-tube formation with adjustable frame for the angle. Bottom beam To fold between 40-80 mm deep. Reception support with spring wheel. Longitudinal soldering iron Hot air blower Pneumatic drive for automatic positioning Device for forming internal folds Welding temperature regulation.
Machine Code FI427
Manufacturer LEMO
Modello Intermat
Year 1996
Type of delivery Conveyor table
Type of handle Soft loop handle
Type of sealing/bags Side weld
Type of bags Soft loop handles
Working width (mm) 750
Bag length 300 to 750 mm.
Cycle / min 120
Unwinder Unwinding 1 meter in diameter.Widths: 400-1600 mm.
Note Servomotors drive Collector table with automatic counter. Type of main welding 40-80 microns in LDPE. Available presolder for thicknesses greater than 50 microns. Double contact welding with cutting blade. Loop loop 350 mm width of coil. 150-200 microns thick. Two lower and upper welding heads. Control of time and temperature. Seal shape: semicircular or elliptical. Triangle bending Semi-tube formation with adjustable frame for the angle. Bottom beam To fold between 40-80 mm deep. Reception support with spring wheel. Longitudinal soldering iron Hot air blower Pneumatic drive for automatic positioning Device for forming internal folds Welding temperature regulation.
** SOLD **
ROLL O MATIC DELTA900
COMAT 2200
SALDOFLEX MODULA SS
VIARA FUTURA 1.200 + FOLDER
VIARA PUPA
ITALWORK