KROENERT RECO 2TD Laminator / coating machine Any water based or solvent based coating 10gsm wet with 50 solid content ** SOLD ** Ask more informations about a similar one

Coatings used in packaging industry are various. Cold and hot seal coating are common. Also, cold and hot seal coatings are commonly used, as well as hot melt and wax coatings. Silicon, Pvdc coating, ant mist and many others are employed. Materials which can be coated with a certain machine depends highly on the type of coating unit(s) available, on machine's construction and equipment.

Machine Code LA044
Manufacturer KROENERT
Model RECO 2TD
Year 1982
Application Coating
Type of lamination/coating Any water based or solvent based coating 10gsm wet with 50 solid content
Working width (mm) 1600
Speed 300m/min max; 250m/min running
First unwinder type Turret - fly splice
Max diameter reel unwinder 1000
Rewinder type Turret - fly splice
Max diameter reel rewinder 1200
Coating unit 2 coating heads. twin direct gravure .Steam dryer ; Energy source:boiler;3 drying zones,6 top; Drive system: Lenze; Power requirements:100amp,380volt,50hz; Space required:20x5; 2nd coating head :7 drying chambers ; fly/splice unwind; speed 180m/min; 2 chill roller stack; Twin direct/reverse gravure coater;The coater has 4 tension control zones with pneumatic dancer rollers. This enables substrates of as low as 30gsm to be handle on this line. This coater is very well maintained. Analogue DC drive system
Drying drying steam, 2 coating heads,1st direct gravure, solvent capability with fullextraction, 3 drying chambers,
Additional information Solvent capability with full extraction; Antistatic throughout machine; Capable of applying 1-2 gsm dry silicon release coating at speed. Direct or reverse gravure.3 drying chambers;1 chill roller . Unwinder : tension control ; Wichita system; Edge guide rewinder :FIFE;

** SOLD **


You may also be interested in:

203628 - NORDMECCANICA SIMPLEX COMBI

NORDMECCANICA SIMPLEX COMBI

Category: Converting machines

Subcategory: Laminators and coaters

Working width (mm): 1300

Year: 1996

88921 - SIDECO

SIDECO

Category: Converting machines

Subcategory: Laminators and coaters

Working width (mm): 1650

Year: 1999

194091 - NORDSON CT6000

NORDSON CT6000

Category: Converting machines

Subcategory: Laminators and coaters

Working width (mm): 1800

Year: 2006

203720 - DCM LAMINASTAR2

DCM LAMINASTAR2

Category: Converting machines

Subcategory: Laminators and coaters

Working width (mm): 1210

Year: 1996

Utilizzando il nostro sito web acconsenti all'uso di cookies.

Informazioni OK