coating machine SOLVENT BASED, SOLVENTLESS , HOTMELT SOLD Ask more informations about a similar one

Coatings used in packaging industry are various. Cold and hot seal coating are common. Also, cold and hot seal coatings are commonly used, as well as hot melt and wax coatings. Silicon, Pvdc coating, ant mist and many others are employed. Materials which can be coated with a certain machine depends highly on the type of coating unit(s) available, on machine's construction and equipment.

Machine Code	LA275
Manufacturer	CMR
Model	DUAL SUPER COMPACT SL/SB/HM
Year	2011
Application	Lamination + coating
Type of lamination/coating	SOLVENT BASED, SOLVENTLESS , HOTMELT
Working width (mm)	1000
Materials	Primary unwinder ;POLYESTER: 10- 12 my ,OPP/BOPP: 15- 25 my,MET. POLYESTER: 12 -25 my,LDPE – HDPE – LLDPE : 40- 60 my,PETP : 9- 30 my,OP: 12- 18 my,NYLON CAST: 30- 80 my,PP CAST:60-150 my,PAPER :40-150 g/m2,ALU: 6,25 - 40 my, Secondary unwinder:BOPP :12- 80 my,PP CAST: 20-150 my ,ALU :7- 40 my,LDPE – LLDPE: 20- 200 my,NYLON CAST:20- 80 my,POLYESTER :10- 20 my,PETP :9- 30 my,OPA :12- 18 my,PAPER:40-150 g/m2 ,
Speed	Production speed: Solventless : 250 mts/min, Solvent base: 200 m/min, Hot melt: 100 m/min
Max diameter reel unwinder	800
Max diameter reel unwinder	800
Max diameter reel rewinder	1000
Coating unit	Coating via rotogravure trolley and hot melt trolley .Coating Group (5 cylinders type) with interchangeable coating units ( NR. 1 cylinder COATING .NR. 1 cylinder CARRIER (sleeves type) NR. 1 cylinder METERING NR. 1 cylinder METERING NR. 1 cylinder PRESSURE
Drying	Electric
Corona treatment	CASON
Additional information	Suitable for Solvent Less - Solvent Base and Hot Melt processes Primary unwinder: Max. Reel Diameter: 800 mm Inner core diameter: 76 – 152 mm Secundary unwinder: Max. Reel Diameter: 800 mm Inner core diameter 76 – 152 mm Rewinder: Max. reel diameter: 1000 mm Inner core diameter: 76- 152 mm TENSION RANGE : Unwinder: 3-30 Kg Rewinder: 5-50 Kg Coating group solventless configuration composed by 5 cylinders drive by AC Vectorial motors Coating grup solvent- rotogravure coating concept composed by 1 cylinder coating (anylox roll) 1 cylinder PRESSURE ROLLER (sleeves type) on trolley WAX COATING DEVICE , mainly composed by : Nr. 1 COLLECTING TANK with double chamber HEATED BY THERMIC OIL RECIRCULATION UPTO A MAX. 170° constantly kept Nr. 1 TANK with double gradient t facilitate the complete discharge FEEDING system of the tank on two ( 2 ) sides to make even the WAX distribution. Nr. 1 METERING rubber coated back cylinder Nr. 1 AC MOTOR to drive the metering back cylinder , with possibility to change the speed from 10% to 50% according to the material’s range Nr. 1 PNEUMATIC system to approach to the rubber coated cyclinder, with pneumatic pistons and pressure regulators ON REMOVABLE TROLLEY Edge guide BST type Installed on the secondary unwinder