** SOLD **
In a blown film extruder PE granulates (or other polymer) are melted in an extruder and pushed through a circular die extruding a tube of molten polymer. Tube is then inflated to multiples of its initial diameter and cooled to form a thin film. Bobble is later collapsed and re-winded.
Ask more informations
about a similar one
- Machine Code
- EX567
- Manufacturer
- KIEFEL
- Modello
- COMPEX 80SA
- Year
- 1996
- Number of layers
- 1
- Material
- HDPE
- Film Width
- 1700
- Output (Kg/h)
- 250 Kg/h
- Screw diam 1
- 80mm
- Description 1
- Gravimetric dosing system Macguire
- Head description
- GAP=1,5 mm IBC System
- Die diam (mm)
- 200 mm
- Bubble cage
- YES
- Panel for gussets
- NO
- Take off unit
- Rotating
- Corona treatment
- NO
- Rewinder Type
- Single winder
- Note
- Vertical take-off unit
Machine Code | EX567 |
Manufacturer | KIEFEL |
Modello | COMPEX 80SA |
Year | 1996 |
Number of layers | 1 |
Material | HDPE |
Film Width | 1700 |
Output (Kg/h) | 250 Kg/h |
Screw diam 1 | 80mm |
Description 1 | Gravimetric dosing system Macguire |
Head description | GAP=1,5 mm IBC System |
Die diam (mm) | 200 mm |
Bubble cage | YES |
Panel for gussets | NO |
Take off unit | Rotating |
Corona treatment | NO |
Rewinder Type | Single winder |
Note | Vertical take-off unit |
WINDMÖLLER & HÖLSCHER
-
Machine Code: EX695
-
Year: 1989
-
Film Width: 1475